Hello, currently I am struggling with the layout editor behavior. I want to rearrange some of my controls (fixed size) but yesterday I was not able to do that. I am using node-red v3.1.9 and node-red-dashboard v3.6.5. …
---
## [Material Icons in Groups are not working, when multiple Icons with same prefix exist](https://discourse.nodered.org/t/material-icons-in-groups-are-not-working-when-multiple-icons-with-same-prefix-exist/87756)
Hello, I recently recognized, that google material icons are not working inside groups, when multiple icons existing with the same prefix. For instance if I select the heat mi-heat icon like so: When deployed it loo…
---
## [Is it possible to open the node-red editor via an url by sending a flow id as a parameter in addition to the access token?](https://discourse.nodered.org/t/is-it-possible-to-open-the-node-red-editor-via-an-url-by-sending-a-flow-id-as-a-parameter-in-addition-to-the-access-token/87581)
Introduction to the problem: We use the node-red API to display the list of flows in our application. In our application, I would like to open the node-red editor in an iframe when we click on a flow located in this li…
---
## [Node-red-contrib-rfxcom segmentation fault](https://discourse.nodered.org/t/node-red-contrib-rfxcom-segmentation-fault/87754)
I've added node-red-contrib-rfxcom 2.13 to my Palette in NodeRed (Docker on Raspberry Pi). When trying a simple flow (rfx-sensor to debug) and configuring rfx to /dev/ttyUSB0 my nodered container instantly crashes when…
---
## [Plotting to Chart from Serial port in @flowfuse/node-red-dashboard](https://discourse.nodered.org/t/plotting-to-chart-from-serial-port-in-flowfuse-node-red-dashboard/87729)
I just can't plot the values from my serial port vs time using the flowfuse dashboard. It works just fine with the dashboard V1, using the default ui-chart. My flow: It does recognise the msg.topic field and add it …
---
## [🎉 Node-RED 4.0.0-beta.2 released](https://discourse.nodered.org/t/node-red-4-0-0-beta-2-released/87026)
:tada: The second beta release of Node-RED 4.0 is now available! Node-RED 4.x requires at least Node 18.x. We recommend using Node 20 This release addresses all of the issues that had been highlighted against the previ…
---
## [Node coverage for flows](https://discourse.nodered.org/t/node-coverage-for-flows/87742)
Dear team, I'm trying to figure out how to have a "node coverage" for my flows. Lest says I have a flow with 20 nodes. I am building functional tests to test/validate my flows. I would love to know how many nodes or p…
---
## [Inherit config to all custom nodes](https://discourse.nodered.org/t/inherit-config-to-all-custom-nodes/87698)
Hi everybody, I'm creating an integration with multiple nodes. Each of these need a configuration node type and other html configs like checkbox etc. How can I embed the necessary html and script parts in each html file…
---
## [UI arrangement in Subflows](https://discourse.nodered.org/t/ui-arrangement-in-subflows/87738)
Hello everyone, I'm currently migrating/redeveloping my flows for DB2 but having problems getting the UI-elements positioned in Sub-Flows (if that is even possible yet !?) My Use-Case: I have Zigbee Lights in all my…
---
## [License for node-red-contrib-mclient-outclient. License not specified in LICENSE.md](https://discourse.nodered.org/t/license-for-node-red-contrib-mclient-outclient-license-not-specified-in-license-md/87668)
Sorry if this question have been answered but I can't seem to find the answer. As mentioned in the title, I'm trying to find the license for this component so that I am able add it in my project. The license.md file on…
---
## [How to make an iframe unclickable?](https://discourse.nodered.org/t/how-to-make-an-iframe-unclickable/87731)
In my dashboard I use a simple 30 min inject-node to trigger an iframe-node with the url of a local weatherforecast-widget. Any idea how to inhibit the user to click on this widget? Thanks in advanced.. Rue
---
## [Dashboard 2 - Multi-state switch](https://discourse.nodered.org/t/dashboard-2-multi-state-switch/85168)
Hey @hotNipi, These gauges look awesome good. Pure art... Hand made stuff, no AI involved I assume :wink: If you should find some time (or energy...)... My D1 dashboard is 'very' primitive, so should be doable to co…
---
## [Taking a global source 3 digit number split into individual numbers and send IR commands based upon the individual numbers](https://discourse.nodered.org/t/taking-a-global-source-3-digit-number-split-into-individual-numbers-and-send-ir-commands-based-upon-the-individual-numbers/87619)
What I want to do is take a number entered and pass along this number as IR codes to flash a channel change on a Dish receiver with Global Cache'. My question is how do I take the individual numbers 2, 0, 4 in this exam…
---
## [New tab when editing groups](https://discourse.nodered.org/t/new-tab-when-editing-groups/87733)
When editing a node or a group in Node-RED in the top right corner there are different tabs, like for example: properties, environment variables and description. Changing between them is done by clicking the icons in the…
---
## [How do I configure a flow to give me a prompt, whenever the Serial port is disconnected?](https://discourse.nodered.org/t/how-do-i-configure-a-flow-to-give-me-a-prompt-whenever-the-serial-port-is-disconnected/87726)
I'm trying to make a flow that reads data from an arduino's COM port, and then log it to a file and display it on my dashboard. I also want a notification to popup when the device is disconnected, or a serial-related err…
---
## [Asymmetric deadband settings in filter node](https://discourse.nodered.org/t/asymmetric-deadband-settings-in-filter-node/87722)
Hi all, New to Node Red, and had a corner case that I could not seem to accomplish with core nodes. I wanted to filter out all messages where a specific value was decreasing (items in a to do list), and only allow incre…
---
## [Any way to set ENV var in template node?](https://discourse.nodered.org/t/any-way-to-set-env-var-in-template-node/87728)
Hi, is there any way to set ENV variables in template instead of having to send them to the node as a msg? Thanks
---
## [Modbus read not connect](https://discourse.nodered.org/t/modbus-read-not-connect/87697)
This might sound like a stupid question but there you go! This is the scenario. I am requesting a list of files from One Drive and then sending this list (about 1000 files) through to a split node. A download of said fi…
---
## [Help making datetime conversion more user friendly](https://discourse.nodered.org/t/help-making-datetime-conversion-more-user-friendly/87705)
I have a flow to process calendar events from this scrape. It will return a local datetime in the form of YYYY-MM-DD HH:mm:ss. This works for me but limited to "en-US" without modification. Input is ISO let start = ne…
---
## [Nr2pico u2if - Python to JS - help WANTED](https://discourse.nodered.org/t/nr2pico-u2if-python-to-js-help-wanted/87706)
I believe there would be a need for a direct Raspberry Pi Pico USB \<-\> NoreRed interface: poll Previously I've listed the possibilities here ... and I think the best approach would be: u2if firmware working together dir…
---
## [Communicating between Rpi \<-\> Pico via USB](https://discourse.nodered.org/t/communicating-between-rpi-pico-via-usb/85294)
Is there somewhere a "ready to use" code for Rasptberry Pico boards I could add names or Serial numbers to, than simply upload to multiple pieces, (changing the name / number) plug into any USB of the RPi, or a HUB att…
---
## [Two columns on dashboard 2](https://discourse.nodered.org/t/two-columns-on-dashboard-2/87696)
Ok, for quite literally weeks I have trying to get stuff moved to dashboard 2. The reason I haven't gotten anything moved over is my total and complete inability to setup a page with two columns. Yes, I cannot get someth…
---
## [Displaying data from context object](https://discourse.nodered.org/t/displaying-data-from-context-object/18951)
Hi. I have a function node and would like to find the value stored in a context object. In this case either 1 or 0. Nothing shows up in the context side panel - I am guessing because I have not stored the value into a …
---
## [I'm missing the Class field in my dashboard nodes](https://discourse.nodered.org/t/im-missing-the-class-field-in-my-dashboard-nodes/87694)
What I have: What I want: notice the Class field is missing. also, the dark/custom theme doesn't work for me (might be unrelated but just mentioning it) other than the 'CSS' part, the node-red installation is w…
---
## [Start flows with by time](https://discourse.nodered.org/t/start-flows-with-by-time/87699)
hello i'm using node red to read data from S7 1200, i made different flows and flows node is making connection with a different PLC , i wish to start flows one at the time every 30s
---
## [MSSQL-Plus node behavior change](https://discourse.nodered.org/t/mssql-plus-node-behavior-change/87614)
Years ago, I created a flow using MSSQL-Plus to execute a stored procedure that receives 4 inputs. It worked fine for years under Node-RED v2.2.2 and MSSQL-Plus v0.7.3. Now I have moved the flow to a new machine runnin…
---
## [Fill color for \ does not work](https://discourse.nodered.org/t/fill-color-for-svg-does-not-work/87679)