# 3-phase power consumption measurement

**URL:** <https://discourse.nodered.org/t/3-phase-power-consumption-measurement/68489>\
**Category:** Hardware\
**Created:** [2 October 2022 14:40 UTC](https://discourse.nodered.org/t/3-phase-power-consumption-measurement/68489 "2022-10-02T14:40:38Z")\
**Posts on this page:** 1\
**Showing post:** 44

<div class="post-metadata">

**Author:** ![Paul-Reed](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/paul-reed/32/66906_2.png) [@Paul-Reed](https://discourse.nodered.org/u/Paul-Reed)\
**Post date:** [1 November 2022 09:14 UTC](https://discourse.nodered.org/t/3-phase-power-consumption-measurement/68489/44 "2022-11-01T09:14:11Z")

</div>

> [@BartButenaers](#):
>
> it seems like the IOWatt solution of @craigcurtin only has clamp inputs to measure induction current:  
> So how on earth can this device measure power then? Please help me to solve my headache about this 😉

It does require reference voltages, which are obtained via voltage transformers.

As I recall, iotawatt has 2 modes, one which requires 3 voltage transformers, 1 for each phase which are wired directly into your supply (just like PZEM). The transformers reduce the AC voltage, making it easier (and safer) for iotawatt to analyse.

The second mode uses derived reference by just using 1 transformer on one phase, and then shifting it's phase by 120 and 240 degrees to assimilate the other 2 phases.  
This is less accurate.

So the upshot is that it does also require connection to your live wires.

Sorry @craigcurtin but I don't share your enthusiasm for iotawatt 😉

---

_[View the full topic](https://discourse.nodered.org/t/3-phase-power-consumption-measurement/68489)._
