# \[Announce\] node-red-contrib-enocean

**URL:** <https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135>\
**Category:** Share Your Nodes\
**Created:** [14 April 2019 18:05 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135 "2019-04-14T18:05:00Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![GL29PA](https://avatars.discourse-cdn.com/v4/letter/g/74df32/32.png) [@GL29PA](https://discourse.nodered.org/u/GL29PA)\
**Post date:** [12 June 2020 22:19 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135/21 "2020-06-12T22:19:53Z")

</div>

Hi,  
I am also trying to use my USB TCM310.  
I get the following from the Input Node:  
{"payload":"55000a0701eba501842a08fffda0818000ffffffff3400a3","meta":{"type":"radio-erp1","rorg":165,"senderId":"fffda081","destinationId":"ffffffff","subTelNum":0,"rssi":52,"timestamp":1592000213039,"status":128},"\_msgid":"a7bf3e49.ddcaa"}

From there, knowing I have an IMPULSE EnOcean SENSOR ([https://www.ewattch.com/en/portfolio-item/enocean-impulse/](https://www.ewattch.com/en/portfolio-item/enocean-impulse/)), how can I get its readings ?

Thanks

---

<div class="post-metadata">

**Author:** ![remisharrock](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/remisharrock/32/31645_2.png) [@remisharrock](https://discourse.nodered.org/u/remisharrock)\
**Post date:** [8 November 2020 22:46 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135/22 "2020-11-08T22:46:44Z")

</div>

I can help you if you paste the flow. I can also speak french is you need 🙂

---

<div class="post-metadata">

**Author:** ![juntiedt](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/juntiedt/32/58357_2.png) [@juntiedt](https://discourse.nodered.org/u/juntiedt)\
**Post date:** [10 December 2020 13:11 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135/23 "2020-12-10T13:11:49Z")

</div>

Hi all,

I have moved node-red-contrib-enocean to another raspi.  
I receive a message out of the input node when I push the connection button on the sensor but the actor node does not show the sensor-data. What is the problem? Is there a trick I should know?

On the old raspi it worked perfectly.

Problem solved! All of a sudden the Actor got the data. I don't know why but it's ok now. 🙂

---

<div class="post-metadata">

**Author:** ![cubertt](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/cubertt/32/38014_2.png) [@cubertt](https://discourse.nodered.org/u/cubertt)\
**Post date:** [28 February 2021 19:55 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135/24 "2021-02-28T19:55:58Z")

</div>

Hi, i want use this nice node/flow (not sure whats the correct name) but i am failing sending telegrams.

I can recieve information while pressing some rocker switches when using the example flow. --\> Usb 300 on my raspberrry 3 is receiving enocean data. Great.

But i want to controll my roller shutter (Tipp-Funk TF61L-230V) with this node, so i need to send telegrams.  
But i dont get it. Normally i need to teach in my usb 300 device . (i did this before while sucsessfully trying openHab).  
And somwhere i need to define which device should get the telegram. Where do i need to put the (teached -in?) sender id?  
Has anyone an example flow, so that i can teach in my USB 300 and controll one of my shutters. That would be perfect. Thanks

Cubertt

[Previous page](https://discourse.nodered.org/t/announce-node-red-contrib-enocean/10135.md?page=1)