# \[Announce\] node-red-contrib-hx77

**URL:** <https://discourse.nodered.org/t/announce-node-red-contrib-hx77/28764>\
**Category:** Share Your Nodes\
**Created:** [22 June 2020 22:06 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-hx77/28764 "2020-06-22T22:06:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rtoenniges](https://avatars.discourse-cdn.com/v4/letter/r/45deac/32.png) [@rtoenniges](https://discourse.nodered.org/u/rtoenniges)\
**Post date:** [22 June 2020 22:06 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-hx77/28764/1 "2020-06-22T22:06:14Z")

</div>

Hi,

I've published my first node 🙂  
Its to connect a HX711 Load Cell Amplifier.

I've wanted to use the HX711 directly in NodeRed and not via the "exec" command.  
On npm was a good working library I could easily implement in a NodeRed-Node.

Important: The "DATA" and "SCK" pin configuration expect hardware pin numbers, not the GPIO pin numbers.

> **[node-red-contrib-hx711](https://www.npmjs.com/package/node-red-contrib-hx711)**
>
> Node to connect a hx711 module

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [21 August 2020 22:06 UTC](https://discourse.nodered.org/t/announce-node-red-contrib-hx77/28764/2 "2020-08-21T22:06:32Z")

</div>

This topic was automatically closed after 60 days. New replies are no longer allowed.