# Atlas Copco Open protcol MID0060 Customer Subscription

**URL:** <https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042>\
**Category:** Industrial\
**Created:** [3 November 2022 15:58 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042 "2022-11-03T15:58:15Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![OrangeRaspberry](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/orangeraspberry/32/106946_2.png) [@OrangeRaspberry](https://discourse.nodered.org/u/OrangeRaspberry)\
**Post date:** [3 November 2022 15:58 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042/1 "2022-11-03T15:58:15Z")

</div>

Now PF6000 have an issue. When multistep strategy is used, if trigger torque of angle mornitor window can't be reach, PF6K will close open protocol port. This is issue can be solved by MID0061 revision 8. But there is only revision 1-7 listed. How can I add a customer revision. It seems not working I set revision 8 as customer revision

---

<div class="post-metadata">

**Author:** ![Steve-Mcl](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/steve-mcl/32/4826_2.png) [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)\
**Post date:** [3 November 2022 16:16 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042/2 "2022-11-03T16:16:45Z")

</div>

You could fork the open-protocol node, add the feature and raise a Pull Request. That way, everyone benefits 🙂

---

<div class="post-metadata">

**Author:** ![OrangeRaspberry](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/orangeraspberry/32/106946_2.png) [@OrangeRaspberry](https://discourse.nodered.org/u/OrangeRaspberry)\
**Post date:** [3 November 2022 16:28 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042/3 "2022-11-03T16:28:21Z")

</div>

![mid0061](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/d/3/d39cc6c63602d853519f861ccb584f717a82b3c4.jpeg)  
I am newbie for this forum. I am not familiar with raise a question. Anyway, I send a screenshot.

---

<div class="post-metadata">

**Author:** ![OrangeRaspberry](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/orangeraspberry/32/106946_2.png) [@OrangeRaspberry](https://discourse.nodered.org/u/OrangeRaspberry)\
**Post date:** [3 November 2022 16:30 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042/5 "2022-11-03T16:30:34Z")

</div>

````auto
[
    {
        "id": "a44779dd41178afe",
        "type": "tab",
        "label": "new",
        "disabled": false,
        "info": "",
        "env": []
    },
    {
        "id": "cf31a9203d7f2c63",
        "type": "op config",
        "name": "",
        "controllerIP": "169.254.1.1",
        "controllerPort": "4545",
        "keepAlive": "10000",
        "timeout": "3000",
        "retries": "3",
        "disablemidparsing": "",
        "rawData": false,
        "generic": false,
        "linkLayer": "auto"
    },
    {
        "id": "1358c6497ed5e9f6",
        "type": "op node",
        "z": "a44779dd41178afe",
        "name": "",
        "config": "cf31a9203d7f2c63",
        "midGroup": "61",
        "customMid": "",
        "revision": "7",
        "customRevision": "",
        "autoSubscribe": true,
        "forwardErrors": false,
        "outputs": 2,
        "x": 580,
        "y": 400,
        "wires": [
            [
                "1c71f86f4e4b0359"
            ],
            []
        ]
    },
    {
        "id": "1c71f86f4e4b0359",
        "type": "debug",
        "z": "a44779dd41178afe",
        "name": "",
        "active": true,
        "tosidebar": true,
        "console": true,
        "tostatus": true,
        "complete": "true",
        "targetType": "full",
        "statusVal": "payload",
        "statusType": "auto",
        "x": 830,
        "y": 400,
        "wires": []
    }
]```
````

---

<div class="post-metadata">

**Author:** ![OrangeRaspberry](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/orangeraspberry/32/106946_2.png) [@OrangeRaspberry](https://discourse.nodered.org/u/OrangeRaspberry)\
**Post date:** [7 November 2022 11:00 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042/6 "2022-11-07T11:00:06Z")

</div>

![mid0061 config](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/7/c/7c491c1b259ccc479c9175a7a27e6223a2b3e6ba.jpeg)  
 ![mid0061](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/9/e9ce66597c704bc12a9982d10247036093e13b2e.jpeg)  
After several testing, I 've found this issue can be solved setting dsable parsing MID0061 and setting a customer revision 8 at MID0061.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [21 November 2022 11:00 UTC](https://discourse.nodered.org/t/atlas-copco-open-protcol-mid0060-customer-subscription/70042/7 "2022-11-21T11:00:52Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.