# Broadlink node S1C
**URL:** https://discourse.nodered.org/t/broadlink-node-s1c/99648
**Category:** General
**Created:** [12 November 2025 12:41 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648 "2025-11-12T12:41:25Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@ohruska](https://discourse.nodered.org/u/ohruska)
#### Post date: [12 November 2025 12:41 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/1 "2025-11-12T12:41:26Z")
I'm very new here.
I need advice on how to control the S1C socket.
What values and in what format do I need to enter for "ON" and "OFF".
Thank you for your help.
Ota
---
### Author:  [@Colin](https://discourse.nodered.org/u/Colin)
#### Post date: [12 November 2025 13:37 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/2 "2025-11-12T13:37:26Z")
Are you using [https://flows.nodered.org/node/node-red-contrib-broadlink-control](https://flows.nodered.org/node/node-red-contrib-broadlink-control)?
If so, then start by looking at the instructions and the linked videos and docs in that link.
---
### Author:  [@ohruska](https://discourse.nodered.org/u/ohruska)
#### Post date: [13 November 2025 11:39 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/3 "2025-11-13T11:39:57Z")
Hi everyone
I have read the documentation as recommended, but no progress. I only managed to test the "MP1" node and it works for me.
2: object
mac: "34ea34f3ee0d"
ip: "192.168.58.172"
type: "MP1"
But the "SP2" node has no success yet.
1: object
mac: "34ea3479bf1f"
ip: "192.168.58.159"
type: undefined
It is not a mistake that SP2 has "type: undefined".
---
### Author:  [@Colin](https://discourse.nodered.org/u/Colin)
#### Post date: [13 November 2025 11:46 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/4 "2025-11-13T11:46:59Z")
It might be best to ask for help on the github repository.
---
### Author:  [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)
#### Post date: [13 November 2025 19:18 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/5 "2025-11-13T19:18:05Z")
Have you tried the built in examples (`CTRL-I`) also available here: [node-red-contrib-broadlink-control/examples at mlfunston-edition · mlfunston/node-red-contrib-broadlink-control · GitHub](https://github.com/mlfunston/node-red-contrib-broadlink-control/tree/mlfunston-edition/examples)
Also, have a read through the [repository issue tracker](https://github.com/mlfunston/node-red-contrib-broadlink-control/issues?q=is%3Aissue) (might find your question already answered)
---
### Author:  [@ohruska](https://discourse.nodered.org/u/ohruska)
#### Post date: [13 November 2025 22:21 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/6 "2025-11-13T22:21:08Z")
Hello.
The error, as always, was between the computer and the chair.
I copied the node and pasted it, but I only overwrote the IP address and MAC, but I did not enter "Add new device".
So the problem is solved.
Thanks for the help
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [27 November 2025 22:21 UTC](https://discourse.nodered.org/t/broadlink-node-s1c/99648/7 "2025-11-27T22:21:54Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.