# Can Bus -- Schneider PLC
**URL:** https://discourse.nodered.org/t/can-bus-schneider-plc/20922
**Category:** General
**Created:** [27 January 2020 18:16 UTC](https://discourse.nodered.org/t/can-bus-schneider-plc/20922 "2020-01-27T18:16:16Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@mastin\_zgz](https://discourse.nodered.org/u/mastin_zgz)
#### Post date: [27 January 2020 18:16 UTC](https://discourse.nodered.org/t/can-bus-schneider-plc/20922/1 "2020-01-27T18:16:16Z")
Good afternoon,
I introduce myself, I am new to node red, I have a project in mind and I don't know if it would be possible to do it, so I ask for help from those who know.
I have a device with Can bus connectivity, and a raspberry pi with a CAN bus module connected (PiCan2). Would it be possible for NodeRed to read specific IDs of the CAN network and send it to a Schneider M241 PLC using some protocol (ModbusTCP or similar) so that depending on the value of the ID, one option or another was executed?
I do not know if I explained well...
Thanks in advance!
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [27 March 2020 18:16 UTC](https://discourse.nodered.org/t/can-bus-schneider-plc/20922/2 "2020-03-27T18:16:20Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.