# CM3 & CM3+ with node red gpio

**URL:** <https://discourse.nodered.org/t/cm3-cm3-with-node-red-gpio/20407>\
**Category:** General\
**Created:** [15 January 2020 21:00 UTC](https://discourse.nodered.org/t/cm3-cm3-with-node-red-gpio/20407 "2020-01-15T21:00:27Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![Ivan](https://avatars.discourse-cdn.com/v4/letter/i/df788c/32.png) [@Ivan](https://discourse.nodered.org/u/Ivan)\
**Post date:** [10 December 2020 07:15 UTC](https://discourse.nodered.org/t/cm3-cm3-with-node-red-gpio/20407/12 "2020-12-10T07:15:11Z")

</div>

HI.

> [@Using a raspberry compute module with Node-red](https://discourse.nodered.org/t/using-a-raspberry-compute-module-with-node-red/3607):
>
> Does anybody know if the rpi-gpio node can be used with a compute module (cm3) ? The pin out is different and the rpi-gpio node does not detect the board type. Thank

---

_[View the full topic](https://discourse.nodered.org/t/cm3-cm3-with-node-red-gpio/20407)._