# Communicate with Ethernet/IP non PLC device
**URL:** https://discourse.nodered.org/t/communicate-with-ethernet-ip-non-plc-device/74235
**Category:** Industrial
**Created:** [26 January 2023 21:59 UTC](https://discourse.nodered.org/t/communicate-with-ethernet-ip-non-plc-device/74235 "2023-01-26T21:59:57Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@thalesmaoa](https://discourse.nodered.org/u/thalesmaoa)
#### Post date: [26 January 2023 21:59 UTC](https://discourse.nodered.org/t/communicate-with-ethernet-ip-non-plc-device/74235/1 "2023-01-26T21:59:57Z")
Hi there, I've been using Codesys to communicate with Cube 67 Ethernet/IP from Murr Elektronics, but I want to do it straight from NodeRed.
> **[CUBE67+ BUS NODE Murrelektronik Shop](https://shop.murrelektronik.com/en/I-O-Systems/Cube67/Bus-nodes/CUBE67-BUS-NODE-56535.html?listtype=search&searchparam=56535&src=search&srchPage=1&perPage=10&pos=1)**
>
> Ethernet/IP | Cube67 | Bus nodes | Cube67+, EtherNet/IP, adjustable via Machine Options Management (MOM), Variables for input/output data,...
The problem is that I have no idea how to perform it. I've been trying to find any direction about it without luck.
So far, I know it uses port 44818 to make connection and port 2222 to send data.
It also connect using pccc, however, it fails since I'm not sure if I must add route (if so, which route), and the variable name.
I also tried eth-ip, which is always offline. Probably the slot.
I can also try using python or any other way to reverse it.
Hope anyone can help me.
@gfcittolin and @machadotiago , you are the ones that are behind those packages. Any tips?
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [27 March 2023 22:00 UTC](https://discourse.nodered.org/t/communicate-with-ethernet-ip-non-plc-device/74235/2 "2023-03-27T22:00:17Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.