# Communication GSK CNC

**URL:** <https://discourse.nodered.org/t/communication-gsk-cnc/90893>\
**Category:** General\
**Created:** [11 September 2024 16:30 UTC](https://discourse.nodered.org/t/communication-gsk-cnc/90893 "2024-09-11T16:30:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DiogoI4.0](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/diogoi4.0/32/106628_2.png) [@DiogoI4.0](https://discourse.nodered.org/u/DiogoI4.0)\
**Post date:** [11 September 2024 16:30 UTC](https://discourse.nodered.org/t/communication-gsk-cnc/90893/1 "2024-09-11T16:30:19Z")

</div>

Hi everyone,

I would like to collect data from GSK control, today I can do this with FANUC via FOCAS2 and SIEMENS via OPCUA using node-red.

I've been looking, but haven't found anyone who has done this on GSK controllers. I need status and part count information.

The controllers are 988TA and 218MC-H, both less than 1 year old. The 988TA manual says that there is the possibility of collecting data via Modbus TCP-IP, but it doesn't give much information on how to do it, such as memory addresses or additional information.

Has anyone collected data via the GSK controllers network and could share some information?

 ![controller 988ta- system info](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/4/34319ee8b387b62221576dde1e3b9ca35c2888a7.jpeg)  
 ![controller 218mc - system info](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/9/7/977be694b9aa045b1823e5945beb8692f6a6e796.jpeg)

---

<div class="post-metadata">

**Author:** ![DiogoI4.0](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/diogoi4.0/32/106628_2.png) [@DiogoI4.0](https://discourse.nodered.org/u/DiogoI4.0)\
**Post date:** [22 November 2024 16:49 UTC](https://discourse.nodered.org/t/communication-gsk-cnc/90893/4 "2024-11-22T16:49:43Z")

</div>

Thanks for answering my question about communicating with GSK CNC controls, I'm still interested in learning more about how to do this. Could you share more information about the gateway device you mentioned? Is it a piece of hardware or just the library? Is this library free?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [20 February 2025 16:50 UTC](https://discourse.nodered.org/t/communication-gsk-cnc/90893/5 "2025-02-20T16:50:24Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.