# Conbee2 on raspberry, WIFI as Access Point possible?

**URL:** <https://discourse.nodered.org/t/conbee2-on-raspberry-wifi-as-access-point-possible/46389>\
**Category:** General\
**Created:** [28 May 2021 07:13 UTC](https://discourse.nodered.org/t/conbee2-on-raspberry-wifi-as-access-point-possible/46389 "2021-05-28T07:13:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ie404](https://avatars.discourse-cdn.com/v4/letter/i/a9a28c/32.png) [@ie404](https://discourse.nodered.org/u/ie404)\
**Post date:** [28 May 2021 07:13 UTC](https://discourse.nodered.org/t/conbee2-on-raspberry-wifi-as-access-point-possible/46389/1 "2021-05-28T07:13:25Z")

</div>

Hi there,

im using a rapsberry pi with conbee2 and have some zigbee devices which work great with node-red.

Now, i bought a shelly Plug S, which uses wifi. To seperate my wifi from a IOT-wifi i´d like to create an own wifi, just for the IOT Devices.

So i configured at the phoscon ui the conbee 2 as an access point, entered ssid and password and after a few seconds the error "Something went wrong" appears and the configuration will roll back. The Only thing i could find about this issue is, that the raspberry must be connected to a switch/router and thats the case at my setup.

So, does anyone has sucessfully created an access point with a conbee2 stick on a raspberry ?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [27 July 2021 07:14 UTC](https://discourse.nodered.org/t/conbee2-on-raspberry-wifi-as-access-point-possible/46389/2 "2021-07-27T07:14:11Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.