# Controlling LIN (Kvaser) from node-red

**URL:** https://discourse.nodered.org/t/controlling-lin-kvaser-from-node-red/78618
**Category:** General
**Created:** [22 May 2023 17:20 UTC](https://discourse.nodered.org/t/controlling-lin-kvaser-from-node-red/78618 "2023-05-22T17:20:48Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![rchandrashekar53](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/rchandrashekar53/32/60423_2.png) [@rchandrashekar53](https://discourse.nodered.org/u/rchandrashekar53)
#### Post date: [22 May 2023 17:20 UTC](https://discourse.nodered.org/t/controlling-lin-kvaser-from-node-red/78618/1 "2023-05-22T17:20:48Z")

</div>

Hi,

i have written some test libraries where i can control devices in my vehicle via MQTT and pi-board. I would like to check if i can do the same using Kvaser (via serial port). This is a LIN based device.

> **[Kvaser Hybrid 2xCAN/LIN | Kvaser](https://www.kvaser.com/product/kvaser-hybrid-2xcan-lin/)**

i would like to send a message based on LIN id. Any thoughts?

---

<div class="post-metadata">

### Author: ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)
#### Post date: [21 July 2023 17:21 UTC](https://discourse.nodered.org/t/controlling-lin-kvaser-from-node-red/78618/2 "2023-07-21T17:21:41Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.