# CtrlX: How to Intsall Palette?

**URL:** <https://discourse.nodered.org/t/ctrlx-how-to-intsall-palette/93085>\
**Category:** General\
**Created:** [12 November 2024 06:15 UTC](https://discourse.nodered.org/t/ctrlx-how-to-intsall-palette/93085 "2024-11-12T06:15:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DaVizzey](https://avatars.discourse-cdn.com/v4/letter/d/77aa72/32.png) [@DaVizzey](https://discourse.nodered.org/u/DaVizzey)\
**Post date:** [12 November 2024 06:15 UTC](https://discourse.nodered.org/t/ctrlx-how-to-intsall-palette/93085/1 "2024-11-12T06:15:52Z")

</div>

Hi there,  
I'm a bit new to Node-RED, Using it through a Bosch Rexroth PLC and i'm trying to learn and explore options.  
So today to communicate and run some Commands to a Camera we use, i have to use TelNet, now i have understood there is a Palette with nodes for that for Node-RED but everytime i try to install it i get errors. I've tracked this down to Node-RED not having acess to the internet, but i do not how to allow it to go Online on a Bosch Rexroth CtrlX PLC.

My main Questions for the community are:

- Can I install it manually on a CtrlX Device? If so, then how?

- How do i enable either my CtrlX Device and/or Node-RED on it to go online when i am connected through my PC with Ethernet Cable?

- Are there any other options with the main nodes i already have to send TelNet Commands through Node-RED or if i can send a Command directly to an open TelNet software for example on another PC that is connected and then it will run the command that is sent automatically?

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [12 November 2024 08:35 UTC](https://discourse.nodered.org/t/ctrlx-how-to-intsall-palette/93085/2 "2024-11-12T08:35:14Z")

</div>

> [@DaVizzey](#):
>
> How do i enable either my CtrlX Device and/or Node-RED on it to go online

I know nothing about the device, but searching online for  
access internet from Bosch Rexroth CtrlX PLC  
brings up a number of hits which might help you.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [10 February 2025 08:35 UTC](https://discourse.nodered.org/t/ctrlx-how-to-intsall-palette/93085/3 "2025-02-10T08:35:24Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.