# Dashboard empty since new releases

**URL:** <https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879>\
**Category:** Dashboard\
**Tags:** node-red-dashboard\
**Created:** [18 September 2022 10:32 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879 "2022-09-18T10:32:18Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [18 September 2022 10:32 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/1 "2022-09-18T10:32:18Z")

</div>

Hi All,  
I use nodered since a couple of years without problems, even on an old PI1.  
Since recently (a few weeks), I reinstall completely 3 Pi (pi zero, 3b and 3b+) from scratch using procedures as previously used and "as in the book". Nodered works as expected (mqtt etc.) but dashboard stays clear (node-red-dashboard).  
Does anyone have the same behaviour?  
Best regards,

Thierry, ON5TE

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [18 September 2022 10:57 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/2 "2022-09-18T10:57:40Z")

</div>

Stop and start one of the pi’s and copy the startup log and paste it to a reply.

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [18 September 2022 14:49 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/3 "2022-09-18T14:49:50Z")

</div>

Hi Paul,

Thanks a lot for your support.

Here is the requested log.

Best regards,

Thierry ON5TE

```auto
[0.000000] Booting Linux on physical CPU 0x0

[0.000000] Linux version 5.10.103-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1529 SMP Tue Mar 8 12:21:37 GMT 2022

[0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d

[0.000000] CPU: div instructions available: patching division code

[0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2

[0.000000] random: fast init done

[0.000000] Memory policy: Data cache writealloc

[0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB

[0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool

[0.000000] Zone ranges:

[0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]

[0.000000] Normal empty

[0.000000] Movable zone start for each node

[0.000000] Early memory node ranges

[0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]

[0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]

[0.000000] On node 0 totalpages: 242688

[0.000000] DMA zone: 2133 pages used for memmap

[0.000000] DMA zone: 0 pages reserved

[0.000000] DMA zone: 242688 pages, LIFO batch:63

[0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920

[0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096

[0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555

[0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=20cf0129-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

[0.000000] Kernel parameter elevator= does not have any effect anymore.

Please use sysfs to set IO scheduler for individual devices.

[0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)

[0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)

[0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off

[0.000000] Memory: 878804K/970752K available (10240K kernel code, 1312K rwdata, 2952K rodata, 1024K init, 862K bss, 26412K reserved, 65536K cma-reserved)

[0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[0.000000] ftrace: allocating 32081 entries in 95 pages

[0.000000] ftrace: allocated 94 pages with 5 groups

[0.000000] rcu: Hierarchical RCU implementation.

[0.000000] Rude variant of Tasks RCU enabled.

[0.000000] Tracing variant of Tasks RCU enabled.

[0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.

[0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=1

[0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).

[0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[0.000011] Switching to timer-based delay loop, resolution 52ns

[0.000175] Console: colour dummy device 80x30

[0.000214] printk: console [tty1] enabled

[0.000254] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

[0.000270] pid_max: default: 32768 minimum: 301

[0.000385] LSM: Security Framework initializing

[0.000523] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)

[0.000536] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)

[0.001376] cgroup: Disabling memory control group subsystem

[0.001536] CPU: Testing write buffer coherency: ok

[0.001860] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[0.002542] Setting up static identity map for 0x100000 - 0x10003c

[0.002642] rcu: Hierarchical SRCU implementation.

[0.003160] smp: Bringing up secondary CPUs ...

[0.003856] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[0.004593] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

[0.005257] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

[0.005338] smp: Brought up 1 node, 4 CPUs

[0.005351] SMP: Total of 4 processors activated (153.60 BogoMIPS).

[0.005357] CPU: All CPU(s) started in HYP mode.

[0.005363] CPU: Virtualization extensions available.

[0.005978] devtmpfs: initialized

[0.015274] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4

[0.015409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[0.015428] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)

[0.017024] pinctrl core: initialized pinctrl subsystem

[0.017739] NET: Registered protocol family 16

[0.020439] DMA: preallocated 1024 KiB pool for atomic coherent allocations

[0.023377] audit: initializing netlink subsys (disabled)

[0.023551] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1

[0.023894] thermal_sys: Registered thermal governor 'step_wise'

[0.024491] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[0.024499] hw-breakpoint: maximum watchpoint size is 8 bytes.

[0.024685] Serial: AMBA PL011 UART driver

[0.034684] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

[0.050057] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-12-01T15:07:06, variant start

[0.060065] raspberrypi-firmware soc:firmware: Firmware hash is 71bd3109023a0c8575585ba87cbb374d2eeb038f

[0.087355] Kprobes globally optimized

[0.090072] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1

[0.091290] SCSI subsystem initialized

[0.091426] usbcore: registered new interface driver usbfs

[0.091459] usbcore: registered new interface driver hub

[0.091498] usbcore: registered new device driver usb

[0.092683] clocksource: Switched to clocksource arch_sys_counter

[0.953096] VFS: Disk quotas dquot_6.6.0

[0.953158] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[0.953276] FS-Cache: Loaded

[0.953464] CacheFiles: Loaded

[0.959198] NET: Registered protocol family 2

[0.959391] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)

[0.960498] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)

[0.960533] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)

[0.960593] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)

[0.960690] TCP: Hash tables configured (established 8192 bind 8192)

[0.960813] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)

[0.960843] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)

[0.960999] NET: Registered protocol family 1

[0.961493] RPC: Registered named UNIX socket transport module.

[0.961500] RPC: Registered udp transport module.

[0.961507] RPC: Registered tcp transport module.

[0.961513] RPC: Registered tcp NFSv4.1 backchannel transport module.

[0.962552] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available

[0.964657] Initialise system trusted keyrings

[0.964827] workingset: timestamp_bits=14 max_order=18 bucket_order=4

[0.969708] zbud: loaded

[0.970833] FS-Cache: Netfs 'nfs' registered for caching

[0.971333] NFS: Registering the id_resolver key type

[0.971358] Key type id_resolver registered

[0.971364] Key type id_legacy registered

[0.971453] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[0.971461] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...

[0.972099] Key type asymmetric registered

[0.972107] Asymmetric key parser 'x509' registered

[0.972137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)

[0.972145] io scheduler mq-deadline registered

[0.972152] io scheduler kyber registered

[0.975163] bcm2708_fb soc:fb: FB found 1 display(s)

[0.990748] Console: switching to colour frame buffer device 160x45

[0.998669] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1280x720

[1.001081] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled

[1.001477] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default

[1.002415] bcm2835-rng 3f104000.rng: hwrng registered

[1.002649] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

[1.003127] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[1.009377] brd: module loaded

[1.016358] loop: module loaded

[1.017348] Loading iSCSI transport class v2.0-870.

[1.018445] usbcore: registered new interface driver lan78xx

[1.018482] usbcore: registered new interface driver smsc95xx

[1.018495] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[1.746503] Core Release: 2.80a

[1.746512] Setting default values for core params

[1.746535] Finished setting default values for core params

[1.946748] Using Buffer DMA mode

[1.946755] Periodic Transfer Interrupt Enhancement - disabled

[1.946761] Multiprocessor Interrupt Enhancement - disabled

[1.946768] OTG VER PARAM: 0, OTG VER FLAG: 0

[1.946783] Dedicated Tx FIFOs mode

[1.947125] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024

[1.947148] FIQ FSM acceleration enabled for :

Non-periodic Split Transactions

Periodic Split Transactions

High-Speed Isochronous Endpoints

Interrupt/Control Split Transaction hack enabled

[1.947156] dwc_otg: Microframe scheduler enabled

[1.947198] WARN::hcd_init_fiq:457: FIQ on core 1

[1.947206] WARN::hcd_init_fiq:458: FIQ ASM at 807cb8b8 length 36

[1.947216] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000

[1.947231] dwc_otg 3f980000.usb: DWC OTG Controller

[1.947254] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

[1.947282] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000

[1.947325] Init: Port Power? op_state=1

[1.947331] Init: Power Port (0)

[1.947536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[1.947546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[1.947553] usb usb1: Product: DWC OTG Controller

[1.947561] usb usb1: Manufacturer: Linux 5.10.103-v7+ dwc_otg_hcd

[1.947569] usb usb1: SerialNumber: 3f980000.usb

[1.948014] hub 1-0:1.0: USB hub found

[1.948048] hub 1-0:1.0: 1 port detected

[1.948872] dwc_otg: FIQ enabled

[1.948879] dwc_otg: NAK holdoff enabled

[1.948885] dwc_otg: FIQ split-transaction FSM enabled

[1.948894] Module dwc_common_port init

[1.949055] usbcore: registered new interface driver usb-storage

[1.949188] mousedev: PS/2 mouse device common for all mice

[1.949882] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

[1.950851] sdhci: Secure Digital Host Controller Interface driver

[1.950859] sdhci: Copyright(c) Pierre Ossman

[1.951210] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe

[1.951575] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe

[1.951694] sdhci-pltfm: SDHCI platform and OF driver helper

[1.953075] ledtrig-cpu: registered to indicate activity on CPUs

[1.953318] hid: raw HID events driver (C) Jiri Kosina

[1.953410] usbcore: registered new interface driver usbhid

[1.953416] usbhid: USB HID core driver

[1.956849] Initializing XFRM netlink socket

[1.956878] NET: Registered protocol family 17

[1.956970] Key type dns_resolver registered

[1.957381] Registering SWP/SWPB emulation handler

[1.957497] registered taskstats version 1

[1.957520] Loading compiled-in X.509 certificates

[1.958036] Key type ._fscrypt registered

[1.958044] Key type .fscrypt registered

[1.958051] Key type fscrypt-provisioning registered

[1.964504] uart-pl011 3f201000.serial: cts_event_workaround enabled

[1.964575] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2

[1.966059] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default

[1.966530] printk: console [ttyS0] disabled

[1.966612] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 31250000) is a 16550

[1.966754] printk: console [ttyS0] enabled

[1.967377] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver

[1.968329] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0

[1.968337] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated

[1.993576] sdhost: log_buf @ (ptrval) (f7507000)

[2.031954] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[2.033636] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[2.035316] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[2.038325] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[2.042728] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

[2.045761] of_cfs_init

[2.046076] of_cfs_init: OK

[2.047366] Waiting for root device PARTUUID=20cf0129-02...

[2.072859] Indeed it is in host mode hprt0 = 00021501

[2.162619] mmc0: host does not support reading read-only switch, assuming write-enable

[2.164496] mmc0: Problem switching card into high-speed mode!

[2.165711] mmc0: new SDHC card at address 0001

[2.166729] mmcblk0: mmc0:0001 SD 29.1 GiB

[2.169615] mmcblk0: p1 p2

[2.209353] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem

[2.209377] EXT4-fs (mmcblk0p2): write access will be enabled during recovery

[2.221745] mmc1: new high speed SDIO card at address 0001

[2.282743] usb 1-1: new high-speed USB device number 2 using dwc_otg

[2.282911] Indeed it is in host mode hprt0 = 00001101

[2.523073] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00

[2.523095] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[2.523948] hub 1-1:1.0: USB hub found

[2.524077] hub 1-1:1.0: 5 ports detected

[2.842738] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[2.973085] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00

[2.973106] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[2.976003] smsc95xx v2.0.0

[3.039799] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:be:51:57

[3.442980] EXT4-fs (mmcblk0p2): recovery complete

[3.446104] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[3.446218] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

[3.447536] devtmpfs: mounted

[3.455055] Freeing unused kernel memory: 1024K

[3.455554] Run /sbin/init as init process

[3.455566] with arguments:

[3.455577] /sbin/init

[3.455588] splash

[3.455598] with environment:

[3.455609] HOME=/

[3.455620] TERM=linux

[4.692003] systemd[1]: System time before build time, advancing clock.

[4.922915] NET: Registered protocol family 10

[4.924552] Segment Routing with IPv6

[5.034816] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)

[5.036005] systemd[1]: Detected architecture arm.

[5.084566] systemd[1]: Set hostname to <machines>.

[6.071082] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.

[6.137248] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.

[6.304279] random: systemd: uninitialized urandom read (16 bytes read)

[6.321793] random: systemd: uninitialized urandom read (16 bytes read)

[6.322958] systemd[1]: Listening on udev Control Socket.

[6.323387] random: systemd: uninitialized urandom read (16 bytes read)

[6.325663] systemd[1]: Created slice User and Session Slice.

[6.326892] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[6.327409] systemd[1]: Listening on initctl Compatibility Named Pipe.

[6.328616] systemd[1]: Listening on Journal Audit Socket.

[6.589209] i2c /dev entries driver

[7.315761] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[7.425410] systemd-journald[113]: Received request to flush runtime journal from PID 1

[8.272895] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.

[8.273160] mc: Linux media interface: v0.10

[8.275574] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[8.275604] [vc_sm_connected_init]: start

[8.285013] [vc_sm_connected_init]: installed successfully

[8.376257] videodev: Linux video capture interface: v2.00

[8.478792] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.

[8.497127] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[8.497878] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[8.500301] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[8.534591] bcm2835_audio bcm2835_audio: card created with 4 channels

[8.546415] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.

[8.547880] bcm2835_audio bcm2835_audio: card created with 4 channels

[8.556225] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.

[8.559429] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13

[8.560056] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14

[8.560507] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15

[8.560863] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16

[8.560898] bcm2835-isp bcm2835-isp: Register output node 0 with media controller

[8.560923] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller

[8.560945] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller

[8.560979] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller

[8.561195] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp

[8.563966] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

[8.617962] bcm2835-codec bcm2835-codec: Device registered as /dev/video10

[8.618032] bcm2835-codec bcm2835-codec: Loaded V4L2 decode

[8.625491] bcm2835-codec bcm2835-codec: Device registered as /dev/video11

[8.625575] bcm2835-codec bcm2835-codec: Loaded V4L2 encode

[8.629624] bcm2835-codec bcm2835-codec: Device registered as /dev/video12

[8.629687] bcm2835-codec bcm2835-codec: Loaded V4L2 isp

[8.632878] bcm2835-codec bcm2835-codec: Device registered as /dev/video18

[8.632972] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx

[9.143786] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[9.298413] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[9.403086] brcmfmac: F1 signature read @0x18000000=0x1541a9a6

[9.418504] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1

[9.419290] usbcore: registered new interface driver brcmfmac

[9.676616] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1

[9.676782] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1

[9.676871] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available

[9.677815] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd

[10.792873] Under-voltage detected! (0x00050005)

[12.759010] random: crng init done

[12.759038] random: 7 urandom warning(s) missed due to ratelimiting

[13.520703] uart-pl011 3f201000.serial: no DMA platform data

[13.965200] 8021q: 802.1Q VLAN Support v1.8

[15.013121] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS

[15.041803] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled

[16.396529] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL)

[16.397019] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[16.413996] smsc95xx 1-1.1:1.0 eth0: Link is Down

[18.336527] Bluetooth: Core ver 2.22

[18.336673] NET: Registered protocol family 31

[18.336687] Bluetooth: HCI device and connection manager initialized

[18.336722] Bluetooth: HCI socket layer initialized

[18.336744] Bluetooth: L2CAP socket layer initialized

[18.336780] Bluetooth: SCO socket layer initialized

[18.414936] Bluetooth: HCI UART driver ver 2.3

[18.414962] Bluetooth: HCI UART protocol H4 registered

[18.415101] Bluetooth: HCI UART protocol Three-wire (H5) registered

[18.415402] Bluetooth: HCI UART protocol Broadcom registered

[18.475288] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off

[18.475358] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[19.499307] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[19.499331] Bluetooth: BNEP filters: protocol multicast

[19.499362] Bluetooth: BNEP socket layer initialized

[27.628780] fuse: init (API version 7.32)

[31.904134] Bluetooth: RFCOMM TTY layer initialized

[31.904203] Bluetooth: RFCOMM socket layer initialized

[31.904254] Bluetooth: RFCOMM ver 1.11

[182.062179] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead

```

Thierry Eggen

Avenue Rogier 13

B-1030 Bruxelles

Tel : +32 2 215 27 74

thierry@eggen.be

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [18 September 2022 15:58 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/4 "2022-09-18T15:58:17Z")

</div>

I'm sorry, I wasn't clear. What I want is the Node-RED startup log. You can open a terminal session on one of the Pi's or ssh into one of the Pi'. and run the commands:  
`node-red-stop`  
`node-red`  
and copy the results. Is should look like this:

```auto
pi@testpi:~ $ node-red
18 Sep 11:57:48 - [info] 

Welcome to Node-RED
===================

18 Sep 11:57:48 - [info] Node-RED version: v3.0.2
18 Sep 11:57:48 - [info] Node.js version: v14.20.0
18 Sep 11:57:48 - [info] Linux 5.10.63-v7+ arm LE
18 Sep 11:57:49 - [info] Loading palette nodes
18 Sep 11:57:56 - [info] Worldmap version 2.26.1
18 Sep 11:57:57 - [info] Dashboard version 3.1.6 started at /ui
18 Sep 11:57:58 - [info] Settings file : /home/pi/.node-red/settings.js
18 Sep 11:57:58 - [info] Context store : 'default' [module=memory]
18 Sep 11:57:58 - [info] User directory : /home/pi/.node-red
18 Sep 11:57:58 - [info] Projects directory: /home/pi/.node-red/projects
18 Sep 11:57:58 - [info] Server now running at http://127.0.0.1:1880/
18 Sep 11:57:58 - [info] Active project : Copy-music-file
18 Sep 11:57:58 - [info] Flows file : /home/pi/.node-red/projects/Copy-music-file/flow.json
18 Sep 11:57:58 - [warn] Using unencrypted credentials
18 Sep 11:57:58 - [info] Starting flows
18 Sep 11:57:58 - [info] Started flows

```

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [18 September 2022 16:20 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/5 "2022-09-18T16:20:02Z")

</div>

Hi Paul,

Here is the log.

Once again, thanks for help.

By the way, Node Red is a great piece of software!

Thierry

pi@machines:~ $ node-red

18 Sep 18:16:47 - [info]

Welcome to Node-RED

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [18 September 2022 17:00 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/6 "2022-09-18T17:00:03Z")

</div>

There is a bit missing from your startup log....  
I want to see everything down to the 🙁

```auto
18 Sep 11:57:58 - [info] Started flows

```

line

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [19 September 2022 10:25 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/7 "2022-09-19T10:25:32Z")

</div>

Hi Paul,

I have an agenda problem here and will come backt to you tomorrow.

Have a nice day

Thierry

Thierry Eggen

Avenue Rogier 13

B-1030 Bruxelles

Tel : +32 2 215 27 74

thierry@eggen.be

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [21 September 2022 15:03 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/8 "2022-09-21T15:03:47Z")

</div>

Dear Paul,

I am coming back to you with the following:

- Reinstalling a pi 3B+ from scratch wit Pi Os 32 bits taken from Raspberry website today
- Installed updates (as proposed during install)
- Allowed VNX, Serial, I2C and 1 wire
- Changed hostname
- Installed Node-red from Nodered website “bash \<curl ………. Update-nodejs-and-nodered)
- Started “start-node-red”
- Connected to XXX:1880 successfully
- From palette installed apparently node-ed-dashboard
- Created a switch and deployed
- Went to XXX.1880/ui =\> no switch

This is what I get since a few weeks.

Note that in installed another UI (with a calendar but don’t recall the name) and it works.

Seems that the “node-red-dashboard” has a problem.

Here are the logs I got.

I will not touch the machine until your recommendations.

Once again, thanks for help.

Thierry

LD nodejs 0 :

NEW nodejs :

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [21 September 2022 15:20 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/9 "2022-09-21T15:20:04Z")

</div>

Can you provide the startup log like I asked a couple days ago.

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [21 September 2022 15:44 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/10 "2022-09-21T15:44:52Z")

</div>

Hi Paul,

Perhaps will I look idiot, but: Where is it and what’s the name?

Sorry …

Thierry Eggen

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [21 September 2022 16:34 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/11 "2022-09-21T16:34:27Z")

</div>

> [@zenofmud](#):
>
> open a terminal session on one of the Pi's or ssh into one of the Pi'. and run the commands:  
> `node-red-stop`  
> `node-red`  
> and copy the results.

If you go back you can see what mine looked like

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [21 September 2022 19:35 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/12 "2022-09-21T19:35:30Z")

</div>

Also check for errors in the browser developer console when you refresh the dashboard page in the browser.

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [22 September 2022 15:07 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/13 "2022-09-22T15:07:46Z")

</div>

Hi Paul and Colin,

Still the same.

No error while accessing via browser.

Always got the following.

> ## Welcome to the Node-RED Dashboard |
> 
> - |  
>   
>   
> Please add some UI nodes to your flow and redeploy.  
>   
> |

Same log

pi@marquise:~ $ node-red-start

Start Node-RED

Once Node-RED has started, point a browser at [http://10.0.0.42:1880](http://10.0.0.42:1880)

On Pi Node-RED works better with the Firefox or Chrome browser

Use node-red-stop to stop Node-RED

Use node-red-start to start Node-RED again

Use node-red-log to view the recent log output

Use sudo systemctl enable nodered.service to autostart Node-RED at every boot

Use sudo systemctl disable nodered.service to disable autostart on boot

To find more nodes and example flows - go to [http://flows.nodered.org](http://flows.nodered.org)

Starting as a systemd service.

22 Sep 16:54:53 - [info]

Welcome to Node-RED

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [22 September 2022 15:22 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/14 "2022-09-22T15:22:36Z")

</div>

> [@teggen](#):
>
> node-red-start

That isn't what @zenofmud asked you to do.

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [22 September 2022 15:36 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/15 "2022-09-22T15:36:34Z")

</div>

Sorry I am confused.

I did NODE-RED-STOP then NODE-RED-Start. Isn’t it what he asked?

Thierry Eggen

Avenue Rogier 13

B-1030 Bruxelles

Tel : +32 2 215 27 74

thierry@eggen.be

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [22 September 2022 15:46 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/16 "2022-09-22T15:46:40Z")

</div>

No.

> [@zenofmud](#):
>
> `node-red-stop`  
> `node-red`

Also include the stop command output in your post please, and check that after the stop then refreshing the browser showing the editor (not the dashboard) gives a timeout.

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [22 September 2022 15:48 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/17 "2022-09-22T15:48:50Z")

</div>

Sorry, also after the stop, run  
`node-red-log`  
And post the last 20 or so lines. Then break out of that and run node-red.

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [22 September 2022 16:00 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/18 "2022-09-22T16:00:37Z")

</div>

Dear Paul and Colin,

If you wish, you normally should have access to the Pi in SSH via either [edited out by moderator]

Login are [edited out by moderator]

Please feel free to have a look.

I need to go but the machine stays alive.

I’ll be there also tomorrow afternoon (Brussels time).

Best regards,

Thierry

Thierry Eggen

Avenue Rogier 13

B-1030 Bruxelles

Tel : +32 2 215 27 74

thierry@eggen.be

---

<div class="post-metadata">

**Author:** ![teggen](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@teggen](https://discourse.nodered.org/u/teggen)\
**Post date:** [22 September 2022 16:04 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/19 "2022-09-22T16:04:41Z")

</div>

Ok, the log is now (including previous)

pi@marquise:~ $ node-red-log

Welcome to Node-RED

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [22 September 2022 16:06 UTC](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879/20 "2022-09-22T16:06:19Z")

</div>

Where is the log?

I have edited your post to remove the login information. Never post login information unless you want to be hacked.

[Next page](https://discourse.nodered.org/t/dashboard-empty-since-new-releases/67879.md?page=2)