# Errors in MODBUS RTU communication

**URL:** <https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255>\
**Category:** Industrial\
**Tags:** modbus\
**Created:** [9 August 2022 23:12 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255 "2022-08-09T23:12:54Z")\
**Posts on this page:** 10\
**Page:** 4

<div class="post-metadata">

**Author:** ![UnborN](https://avatars.discourse-cdn.com/v4/letter/u/4491bb/32.png) [@UnborN](https://discourse.nodered.org/u/UnborN)\
**Post date:** [3 September 2022 08:51 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/61 "2022-09-03T08:51:14Z")

</div>

So the value you are getting by setting Active import to biguint64(be) in buffer-parser is wrong ?  
The manual just says that its **unsigned** but doesnt say what kind of unsigned. We were only guessing that its biguint64 because of the gap of registers between the Import and Export.

If that is the case then i think it would be easier to set a Modbus node to read 8 registers from address 20480 (this should cover both active import and export), then wire a **complete msg object** Debug node to the first output of the Modbus node and use copy value / share the msg by hovering over it in the Debug window.

![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/1/4/1477a2e9cadd26abe7115fa3184f85cfa4f068b2.png)

.. and tell us what values you expect for active Import and active Export.

---

<div class="post-metadata">

**Author:** ![rob2](https://avatars.discourse-cdn.com/v4/letter/r/f9ae1b/32.png) [@rob2](https://discourse.nodered.org/u/rob2)\
**Post date:** [3 September 2022 09:11 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/62 "2022-09-03T09:11:35Z")

</div>

I red more about the modbus flows. I found that there are 2 ways to read the values. The upper exit flow and the lowest exit (flow2).  
As far as I can see in the raw data I need 4 values when i read from payload.buffer and 2 values when I read from payload.data[0].  
These are the raw values from Node-Red, I used flowexit 2 to generate this.  
Do I need the payload.buffer[0] or payload.data[0] values. I do use flowexit 1 at the moment but is this correct?  
This is not the complete message object but normal output from flowoutput 2:

```auto
msg.payload = {
    value: msg.payload,
    'fc': 3,
    'unitid': 3,
    'address': 23296,
    'quantity': 88
}

return msg

```

 ![msg_payload exitflow2](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/1/7/170d4f5570eccf167fb55fd26d441504bae445a1.png)

I create the active import object in a moment.

---

<div class="post-metadata">

**Author:** ![rob2](https://avatars.discourse-cdn.com/v4/letter/r/f9ae1b/32.png) [@rob2](https://discourse.nodered.org/u/rob2)\
**Post date:** [3 September 2022 09:56 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/63 "2022-09-03T09:56:46Z")

</div>

> [@UnborN](#):
>
> So the value you are getting by setting Active import to biguint64(be) in buffer-parser is wrong ?

The values are correct at the moment but active import can grow fast, so least significant bit will not be enough and in a year or two it has to bee presented correct too. I need to be sure the right values are safed.

--never mind found the errorsource, didn't change back buffer.payload to msg.payload.

---

<div class="post-metadata">

**Author:** ![rob2](https://avatars.discourse-cdn.com/v4/letter/r/f9ae1b/32.png) [@rob2](https://discourse.nodered.org/u/rob2)\
**Post date:** [3 September 2022 11:34 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/64 "2022-09-03T11:34:37Z")

</div>

When I use BigInt64BE and I load 8 modbus addresses I get an error:

 ![error](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/9/a/9aec53489b584286d49803808ca6bf128c0e20b6.png)

TypeError: Cannot mix BigInt and other types, use explicit conversions

When I changed it to UInt32BE this is the result:  
`{"topic":"K03-ID3","messageId":"631339fb9962a9fe8ce0c922","payload":[{"activeimportKWH":112.7},{"MeterId":"K03-ID3","Locatie":"loc1","Locatiegroep":"Huis"},{"timestamp":1662204411665}],"queueLengthByUnitId":{"unitId":3,"queueLength":0},"queueUnitId":3,"unitId":3,"modbusRequest":{"value":1662204411514,"unitid":3,"fc":3,"address":20480,"quantity":4,"emptyMsgOnFail":true,"keepMsgProperties":false,"messageId":"631339fb9962a9fe8ce0c922"},"responseBuffer":{"data":[0,0,0,1127],"buffer":[0,0,0,0,0,0,4,103]},"_msgid":"0e56ea88c50ab3ed","originalPayload":[0,0,0,1127],"specification":{"options":{"byteSwap":[],"resultType":"value","singleResult":true,"msgProperty":"payload","setTopic":true},"items":[{"type":"uint32be","name":"activeimport","offset":4,"length":1,"offsetbit":0,"scale":"/10","mask":"","id":0,"scaler":{"operator":"/","operand":10},"value":112.7}]},"values":[112.7],"objectResults":{"activeimport":{"type":"uint32be","name":"activeimport","offset":4,"length":1,"offsetbit":0,"scale":"/10","mask":"","id":0,"scaler":{"operator":"/","operand":10},"value":112.7}},"keyvalues":{"activeimport":112.7},"arrayResults":[{"type":"uint32be","name":"activeimport","offset":4,"length":1,"offsetbit":0,"scale":"/10","mask":"","id":0,"scaler":{"operator":"/","operand":10},"value":112.7}],"buffer":[0,0,0,0,0,0,4,103]}`

---

<div class="post-metadata">

**Author:** ![UnborN](https://avatars.discourse-cdn.com/v4/letter/u/4491bb/32.png) [@UnborN](https://discourse.nodered.org/u/UnborN)\
**Post date:** [3 September 2022 19:50 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/65 "2022-09-03T19:50:11Z")

</div>

> [@rob2](#):
>
> "responseBuffer":{"data":[0,0,0,1127],"buffer":[0,0,0,0,0,0,4,103]}

I usually link `msg.responseBuffer.buffer` to the buffer-parser,  
as this is the path where the buffer data is using the top output of the Modbus node.

![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/a/2/a222c156ea2c1ef1421ba07e206f18d8151b3797.png)

With the above buffer that shows in your shared msg i get with biguint64(be)

![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/6/e6a4f278ba24fda55e0021ada7e33d81eed6083d.png)

---

<div class="post-metadata">

**Author:** ![rob2](https://avatars.discourse-cdn.com/v4/letter/r/f9ae1b/32.png) [@rob2](https://discourse.nodered.org/u/rob2)\
**Post date:** [4 September 2022 13:26 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/66 "2022-09-04T13:26:42Z")

</div>

Thanks UnborN,  
I see what you mean. I think we're getting close. I use the wrong property as datasource in de buffer-parser node.

```auto
msg.responseBuffer.buffer

```

It takes some time before I can test the new flow but I come back with the results.

---

<div class="post-metadata">

**Author:** ![rob2](https://avatars.discourse-cdn.com/v4/letter/r/f9ae1b/32.png) [@rob2](https://discourse.nodered.org/u/rob2)\
**Post date:** [9 September 2022 16:01 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/67 "2022-09-09T16:01:28Z")

</div>

Well I have done some tests after the changes in the buffernodes and it works very well. I learned awfully lots about Node-RED and Javscript last weeks. Thank you all!

But there is more. One measurement with strange value, I come to that later.

First a little Modbus RTU RS485 documentation of what I did.

**Active import**

 ![activeimportbufferparser](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/8/d/8df687d70d8377b982597b4974bb30de4a5a4788.png)

I had a problem with BigInt, ABB resulst in a number (kWh) with 2 decimals but Javascript BigInt64 refuses to accept this, I decided to convert to number format.

👉 Is there a better method?

Edit function Node active use:

```auto
// In case of very Big numbers this BigInt64 conversion to Number may be lossy!
// just remove the divide by 100 and drop last 2 digits in BigInt64 number for ActiveImport
ActiveImport = Number(msg.payload[0]) / 100;

msg.payload = [
    {
        VerbruikKWH: ActiveImport
    },
    {
        MeterId: 'K03-ID3',
        Locatie: 'Grnd-Waterpomp Kelder',
        Locatiegroep: 'Huis'
    },
    { timestamp: Date.now()}
];

return msg;

```

Results in:  
 ![activeimportdebug](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/9/392120e79244165124be83a1d73ec1eae6801e22.png)

**Voltages**

 ![voltagebufferparser](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/b/e/bef3e78e4200c6c993fb8273dbc4abc9906955a5.png)

Edit function Node

```auto
msg.payload = [
    {
        VoltageL1: msg.payload[0],
        VoltageL2: msg.payload[1],
        VoltageL3: msg.payload[2],
        Frequentie: msg.payload[3]
    },
    {
        MeterId: 'K03-ID3',
        Locatie: 'K03',
        Locatiegroep: 'Huis'
    },
    { timestamp: Date.now()}
];

return msg;

```

Results in:  
 ![voltagedebug](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/a/4/a42fa877b8f0bc1a56b31b3ec84e4cb180fd850f.png)

**Current/Power**

 ![powerbufferparser](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/2/2/22665bf061e04ff4939fb4834c58e204e70ee342.png)

```auto
msg.payload = [
    {
        StroomL1: msg.payload[0],
        StroomL2: msg.payload[1],
        StroomL3: msg.payload[2],
// StroomN: msg.payload[3],
        VermogenT: msg.payload[4],
        VermogenL1: msg.payload[5],
        VermogenL2: msg.payload[6],
        VermogenL3: msg.payload[7],
    },
    {
        MeterId: 'K03-ID3',
        Locatie: 'K03',
        Locatiegroep: 'Huis'
    },
    { timestamp: Date.now()}
];

return msg;

```

results in:  
 ![powerdebug](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/6/e61a749c64327a8f845c3bc0d7b69dd68c81ac7e.png)

So all seems wel but there is one value which is very unlikely --\> StroomN (this means Current) has a value of 42949672.95 Ampere.

👉 Does anyone of you have any idea what is going on here? I better do correct this now.

This is the result of my message object:

```auto
{"topic":"K03-ID3","messageId":"amessageid","payload":[{"StroomL1":1.04,"StroomL2":1.05,"StroomL3":1.04,"VermogenT":271.75,"VermogenL1":96.36,"VermogenL2":91.89,"VermogenL3":83.5},{"MeterId":"K03-ID3","Locatie":"K03","Locatiegroep":"Huis"},{"timestamp":1662737950647}],"queueLengthByUnitId":{"unitId":3,"queueLength":0},"queueUnitId":3,"unitId":3,"modbusRequest":{"value":[0,2302,0,2347,0,2296,0,4014,0,4011,0,4002,0,104,0,105,0,104,65535,65535,0,27175,0,9636,0,9189,0,8350,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,5000,32767,32767,32767,32767,32767,32767,32767,65535,65535,65535,32767,32767,32767,375,32767,32767,32767,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535],"unitid":3,"fc":3,"address":23296,"quantity":88,"emptyMsgOnFail":true,"keepMsgProperties":false,"messageId":"631b5e1e1093f9c5335c1472"},"responseBuffer":{"data":[0,2302,0,2347,0,2296,0,4014,0,4011,0,4002,0,104,0,105,0,104,65535,65535,0,27175,0,9636,0,9189,0,8350,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,5000,32767,32767,32767,32767,32767,32767,32767,65535,65535,65535,32767,32767,32767,375,32767,32767,32767,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535],"buffer":[0,0,8,254,0,0,9,43,0,0,8,248,0,0,15,174,0,0,15,171,0,0,15,162,0,0,0,104,0,0,0,105,0,0,0,104,255,255,255,255,0,0,106,39,0,0,37,164,0,0,35,229,0,0,32,158,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,19,136,127,255,127,255,127,255,127,255,127,255,127,255,127,255,255,255,255,255,255,255,127,255,127,255,127,255,1,119,127,255,127,255,127,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255]},"_msgid":"e1fae1b7cf82c08c","originalPayload":[0,2302,0,2347,0,2296,0,4014,0,4011,0,4002,0,104,0,105,0,104,65535,65535,0,27175,0,9636,0,9189,0,8350,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,32767,65535,5000,32767,32767,32767,32767,32767,32767,32767,65535,65535,65535,32767,32767,32767,375,32767,32767,32767,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535],"specification":{"options":{"byteSwap":[],"resultType":"value","singleResult":true,"msgProperty":"payload","setTopic":true},"items":[{"type":"uint32be","name":"StroomL1","offset":24,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":0,"scaler":{"operator":"/","operand":100},"value":1.04},{"type":"uint32be","name":"StroomL2","offset":28,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":1,"scaler":{"operator":"/","operand":100},"value":1.05},{"type":"uint32be","name":"StroomL3","offset":32,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":2,"scaler":{"operator":"/","operand":100},"value":1.04},{"type":"uint32be","name":"StroomN","offset":36,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":3,"scaler":{"operator":"/","operand":100},"value":42949672.95},{"type":"uint32be","name":"VermogenT","offset":40,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":4,"scaler":{"operator":"/","operand":100},"value":271.75},{"type":"uint32be","name":"VermogenL1","offset":44,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":5,"scaler":{"operator":"/","operand":100},"value":96.36},{"type":"uint32be","name":"VermogenL2","offset":48,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":6,"scaler":{"operator":"/","operand":100},"value":91.89},{"type":"uint32be","name":"VermogenL3","offset":52,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":7,"scaler":{"operator":"/","operand":100},"value":83.5}]},"values":[1.04,1.05,1.04,42949672.95,271.75,96.36,91.89,83.5],"objectResults":{"StroomL1":{"type":"uint32be","name":"StroomL1","offset":24,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":0,"scaler":{"operator":"/","operand":100},"value":1.04},"StroomL2":{"type":"uint32be","name":"StroomL2","offset":28,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":1,"scaler":{"operator":"/","operand":100},"value":1.05},"StroomL3":{"type":"uint32be","name":"StroomL3","offset":32,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":2,"scaler":{"operator":"/","operand":100},"value":1.04},"StroomN":{"type":"uint32be","name":"StroomN","offset":36,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":3,"scaler":{"operator":"/","operand":100},"value":42949672.95},"VermogenT":{"type":"uint32be","name":"VermogenT","offset":40,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":4,"scaler":{"operator":"/","operand":100},"value":271.75},"VermogenL1":{"type":"uint32be","name":"VermogenL1","offset":44,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":5,"scaler":{"operator":"/","operand":100},"value":96.36},"VermogenL2":{"type":"uint32be","name":"VermogenL2","offset":48,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":6,"scaler":{"operator":"/","operand":100},"value":91.89},"VermogenL3":{"type":"uint32be","name":"VermogenL3","offset":52,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":7,"scaler":{"operator":"/","operand":100},"value":83.5}},"keyvalues":{"StroomL1":1.04,"StroomL2":1.05,"StroomL3":1.04,"StroomN":42949672.95,"VermogenT":271.75,"VermogenL1":96.36,"VermogenL2":91.89,"VermogenL3":83.5},"arrayResults":[{"type":"uint32be","name":"StroomL1","offset":24,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":0,"scaler":{"operator":"/","operand":100},"value":1.04},{"type":"uint32be","name":"StroomL2","offset":28,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":1,"scaler":{"operator":"/","operand":100},"value":1.05},{"type":"uint32be","name":"StroomL3","offset":32,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":2,"scaler":{"operator":"/","operand":100},"value":1.04},{"type":"uint32be","name":"StroomN","offset":36,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":3,"scaler":{"operator":"/","operand":100},"value":42949672.95},{"type":"uint32be","name":"VermogenT","offset":40,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":4,"scaler":{"operator":"/","operand":100},"value":271.75},{"type":"uint32be","name":"VermogenL1","offset":44,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":5,"scaler":{"operator":"/","operand":100},"value":96.36},{"type":"uint32be","name":"VermogenL2","offset":48,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":6,"scaler":{"operator":"/","operand":100},"value":91.89},{"type":"uint32be","name":"VermogenL3","offset":52,"length":1,"offsetbit":0,"scale":"/100","mask":"","id":7,"scaler":{"operator":"/","operand":100},"value":83.5}],"buffer":[0,0,8,254,0,0,9,43,0,0,8,248,0,0,15,174,0,0,15,171,0,0,15,162,0,0,0,104,0,0,0,105,0,0,0,104,255,255,255,255,0,0,106,39,0,0,37,164,0,0,35,229,0,0,32,158,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,127,255,255,255,19,136,127,255,127,255,127,255,127,255,127,255,127,255,127,255,255,255,255,255,255,255,127,255,127,255,127,255,1,119,127,255,127,255,127,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255]}

```

---

<div class="post-metadata">

**Author:** ![UnborN](https://avatars.discourse-cdn.com/v4/letter/u/4491bb/32.png) [@UnborN](https://discourse.nodered.org/u/UnborN)\
**Post date:** [10 September 2022 12:10 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/68 "2022-09-10T12:10:23Z")

</div>

> [@rob2](#):
>
> I had a problem with BigInt, ABB resulst in a number (kWh) with 2 decimals but Javascript BigInt64 refuses to accept this, I decided to convert to number format.

interesting .. i was wondering about this also about javascript BigInts ..  
so you were trying to directly divide the bigInt / 100 and it wasnt working ?  
yea .. it seems that bigints can only be divided by another bigInt ?  
unless you convert it to a Number as you did but you have to be sure that the Active import value wont exceed the Maximum safe integer ( Number.MAX\_SAFE\_INTEGER : 9007199254740991n )

There are some interesting examples on the [MDN website](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/BigInt)

```auto
const truncated = 5n / 2n
// ↪ 2n, not 2.5n

```

and also this [article](https://stackoverflow.com/questions/54409854/how-to-divide-two-native-javascript-bigints-and-get-a-decimal-result) to avoid losing that precision that you noticed, which they multiply the bigint by `100n`, convert it to a Number and then divide it by 10000 (in your case) to get the float representation of the value.

---

<div class="post-metadata">

**Author:** ![rob2](https://avatars.discourse-cdn.com/v4/letter/r/f9ae1b/32.png) [@rob2](https://discourse.nodered.org/u/rob2)\
**Post date:** [10 September 2022 16:40 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/69 "2022-09-10T16:40:20Z")

</div>

> [@UnborN](#):
>
> so you were trying to directly divide the bigInt / 100 and it wasn't working ?

No it isn't working... This is the error (I had the error on the buffer parser too but dropped the screenprints and function code I tested yesterday):

 ![error1](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/f/b/fb979a1187218f54ebc0d628461899cc00e7ec7f.jpeg)

I tried this thing from your first linked website yesterday too:

```auto
var a = 12340000000000000000n;
var b = 1000000000000000000n;

console.log(Number(a * 100n / b) / 100);

```

I got the same error, this time in the function. Although I'm not sure now if I typed "a \* 100_ **n** _". I think I missed the "n".... Is important as I read on [this page](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/BigInt).

It costed me already lots of time experimenting so I took the short way to succes: convert to number. Creating an own class was a bridge to far for me. Where do you create such a thing? In the same function node? Are there side effects in the flows or is this local in the used function node?

```auto
class BigDecimal {

```

I tried some other ways:  
Convert Bigint to string, remove last 2 digits and concatenate the string together: `concatenated_Bigint &"."&"last_two_2_digits"`.  
Last 2 digits could I try to find with `Bigint - 100 * (Bigint / 100)` which maybe could have worked if I used 100_ **n** _.

I found the concatenation function "Slice" for this later. Funny, I see now that I tried to reinvent that "class BigDecimal" in a simpler way 🙂. Which is not very easy if you know very little from the basics of Javascript nor Java.

Would that class Bigdecimal be a good way to use here?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [28 September 2022 11:58 UTC](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255/70 "2022-09-28T11:58:36Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

[Previous page](https://discourse.nodered.org/t/errors-in-modbus-rtu-communication/66255.md?page=3)