# Gateway data to a file

**URL:** <https://discourse.nodered.org/t/gateway-data-to-a-file/30443>\
**Category:** General\
**Created:** [21 July 2020 07:22 UTC](https://discourse.nodered.org/t/gateway-data-to-a-file/30443 "2020-07-21T07:22:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Roger](https://avatars.discourse-cdn.com/v4/letter/r/c0e974/32.png) [@Roger](https://discourse.nodered.org/u/Roger)\
**Post date:** [21 July 2020 07:22 UTC](https://discourse.nodered.org/t/gateway-data-to-a-file/30443/1 "2020-07-21T07:22:23Z")

</div>

Hello,  
I configured a temperature sensor with my arduino and I send the data to my gateway (multitech conduit). Now with node-red I need to get this data and save it in a file (xlsx or similar).  
I intend to receive the data with node LoraWan RX configuring it with the UUID of my gateway, after it put a function where I only catch the payload of the data, and finally, a debug to see if I do it well and a file generator.  
When I had all of it the intention is to adapt if to represent a OPC UA server.  
Somebody can help me or knows if I'm going well?

Thanks, Roger. ![Captura](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/8/5/85a8c96545b49bde4073a6140912f09016b6de45.png)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [19 September 2020 07:22 UTC](https://discourse.nodered.org/t/gateway-data-to-a-file/30443/2 "2020-09-19T07:22:24Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.