# Ge Fanuc 90-30 plc

**URL:** <https://discourse.nodered.org/t/ge-fanuc-90-30-plc/42070>\
**Category:** General\
**Created:** [5 March 2021 08:51 UTC](https://discourse.nodered.org/t/ge-fanuc-90-30-plc/42070 "2021-03-05T08:51:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Senthil567](https://avatars.discourse-cdn.com/v4/letter/s/71e660/32.png) [@Senthil567](https://discourse.nodered.org/u/Senthil567)\
**Post date:** [5 March 2021 08:51 UTC](https://discourse.nodered.org/t/ge-fanuc-90-30-plc/42070/1 "2021-03-05T08:51:55Z")

</div>

Hi,

We are using GE Fanuc 90-30 plc it has GE-SRTP protocol TCP/IP Ethernet communications what nodes can be used to fetch datas from the registers can anyone help us ,

Thankyou

---

<div class="post-metadata">

**Author:** ![Steve-Mcl](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/steve-mcl/32/4826_2.png) [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)\
**Post date:** [5 March 2021 08:55 UTC](https://discourse.nodered.org/t/ge-fanuc-90-30-plc/42070/2 "2021-03-05T08:55:10Z")

</div>

As I said on your other thread...

> [@Node red with 90-30 plc](https://discourse.nodered.org/t/node-red-with-90-30-plc/40918/4):
>
> Doesn't this PLC have Modbus RTU? In which case you can use the Modbus nodes.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [4 May 2021 08:55 UTC](https://discourse.nodered.org/t/ge-fanuc-90-30-plc/42070/3 "2021-05-04T08:55:16Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.