# Heating panel from scratch

**URL:** <https://discourse.nodered.org/t/heating-panel-from-scratch/36269>\
**Category:** General\
**Created:** [21 November 2020 00:20 UTC](https://discourse.nodered.org/t/heating-panel-from-scratch/36269 "2020-11-21T00:20:30Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![krambriw](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/krambriw/32/5429_2.png) [@krambriw](https://discourse.nodered.org/u/krambriw)\
**Post date:** [21 November 2020 06:02 UTC](https://discourse.nodered.org/t/heating-panel-from-scratch/36269/2 "2020-11-21T06:02:03Z")

</div>

Maybe of interest, we have an ongoing discussion regarding control of a gas heating system here:

> [@Controlling a device based on 2 inputs](https://discourse.nodered.org/t/controlling-a-device-based-on-2-inputs/35892):
>
> I amd trying to control a pump in the central heating system, based on the input of 2 thermostats. The pump needs to run when the living room temp is lower than the living room set temp. The living room thermostat is the only thermostat that is able to control the central heating, but when the bedroom thermostat requests heat, I need to do that by controlling the set temp and the pump. I am trying to create a flow, that is able to temporary raise the set temp, but without activating the pump (…

---

_[View the full topic](https://discourse.nodered.org/t/heating-panel-from-scratch/36269)._