# Home Assistant Insteon Thermostat Intergration
**URL:** https://discourse.nodered.org/t/home-assistant-insteon-thermostat-intergration/88396
**Category:** General
**Created:** [31 May 2024 02:34 UTC](https://discourse.nodered.org/t/home-assistant-insteon-thermostat-intergration/88396 "2024-05-31T02:34:10Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Sparks70b](https://discourse.nodered.org/u/Sparks70b)
#### Post date: [31 May 2024 02:34 UTC](https://discourse.nodered.org/t/home-assistant-insteon-thermostat-intergration/88396/1 "2024-05-31T02:34:11Z")
I currently have Home Assistant and Node Red integrated with. Insteon, Zwave and Zigbee. Using Debug mode and going node by node I was able to figure everything out up until this question. I am having trouble with my Insteon thermostat. I am assuming I need some sort of JSON to trigger anything on the thermostat.
Does anyone have any idea of how to do that. I am most interested in triggering the AC and heat to come on at a set temperature. If I can do that, I can work my way through the other issues.
Thanks,
Randy
---
### Author:  [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)
#### Post date: [31 May 2024 06:15 UTC](https://discourse.nodered.org/t/home-assistant-insteon-thermostat-intergration/88396/2 "2024-05-31T06:15:08Z")
Welcome to the forums @Sparks70b
On the basis the Insteon is exposed/managed inside Home Assistant, I feel this is better answered by that community.
Many here do not use Home Assistant.
At a guess you need to use some HA Node, to address the thermo, and send it a command, but that is where many here won't know, given its a HA specific.
---
### Author:  [@Sparks70b](https://discourse.nodered.org/u/Sparks70b)
#### Post date: [3 June 2024 02:50 UTC](https://discourse.nodered.org/t/home-assistant-insteon-thermostat-intergration/88396/3 "2024-06-03T02:50:43Z")
I figured it out. I will post what I did here in case anyone else has this question. I loaded the climate set temperature node. I could not figure out what Json code to use. It was my first time using this node and I failed to scroll to the bottom and all property were listed. I just put them in JSON format and put it in data and it worked. My AC immediately kicked on
{"hvac\_mode":"cool","temperature":67}
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [1 September 2024 02:51 UTC](https://discourse.nodered.org/t/home-assistant-insteon-thermostat-intergration/88396/4 "2024-09-01T02:51:13Z")
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.