# Home Assistant & Victron
**URL:** https://discourse.nodered.org/t/home-assistant-victron/84997
**Category:** General
**Created:** [28 January 2024 17:58 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997 "2024-01-28T17:58:06Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Dacron](https://discourse.nodered.org/u/Dacron)
#### Post date: [28 January 2024 17:58 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/1 "2024-01-28T17:58:06Z")
Hi I have Node Red on my Victron multi plus and integrated in Home Assistant both on the same network is it possible to access the Victron control nodes in the Home assistant instance to use Home Assistant devices in a Victron flow ?
Thanks
---
### Author:  [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)
#### Post date: [28 January 2024 18:04 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/2 "2024-01-28T18:04:15Z")
Welome,
This is better answered by the HA community - most here do not use HA.
---
### Author:  [@Dacron](https://discourse.nodered.org/u/Dacron)
#### Post date: [28 January 2024 18:17 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/3 "2024-01-28T18:17:38Z")
Ok let’s try this. I have two node red instances on the same network is it possible to combine them in one place to have nodes from both working in the same flow ?
Thanks
---
### Author:  [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)
#### Post date: [28 January 2024 18:22 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/4 "2024-01-28T18:22:50Z")
No,
A Node will only be available to the Node RED instance it is created, and is not seen by other Node RED instances.
You can however, create a communication medium between 2 Node RED instances (TCP, MQTT, Web Scoket etc)
But they will not know about Nodes from each other - you will have to orchestrate any message routing yourself.
---
### Author:  [@Dacron](https://discourse.nodered.org/u/Dacron)
#### Post date: [28 January 2024 18:27 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/5 "2024-01-28T18:27:17Z")
Ok thanks it’s never as simple as you think is it 👍
---
### Author:  [@Jean-Luc](https://discourse.nodered.org/u/Jean-Luc)
#### Post date: [28 January 2024 22:00 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/6 "2024-01-28T22:00:56Z")
> [@Dacron](#):
>
> Ok let’s try this. I have two node red instances on the same network is it possible to combine them in one place to have nodes from both working in the same flow
Perhaps you could draw us a diagram of the topography of the various elements. I'm at a loss to know where each part of your configuration is located.
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [27 April 2024 22:01 UTC](https://discourse.nodered.org/t/home-assistant-victron/84997/7 "2024-04-27T22:01:48Z")
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.