So far I've been able to use VLC on my Windows laptop to decode and stream an RTSP stream directly from my HikVision cameras. The command to run VLC to do this is vlc.exe -R rtsp://admin:password@10.4.5.24:554/Streaming/Channels/101/ --sout "#transcode{vcodec=mjpg,vb=2500,scale=1.0,fps=10,acodec=no…

It is shared already, just follow the link you see in the posting above yours

Hey Walter, I was just wondering, can you help me get the notification of movement? I have an IP camera in my dash and i want to get a notification in my dash if it identifies any movement (Not in the DNN Analyzewr leevel yet). I have a high sensitivity setup in Motion app. TYIA

[image] fs.santos: I have a high sensitivity setup in Motion app. Do you mean you are already using Motion for motion detection ( GitHub - Motion-Project/motion: Motion, a software motion detector. Home page: https://motion-project.github.io/ ) if so then that can run a script on motion detecti…

Hi, In Motion there are several possibilities to achieve this. One that I use myself is the configuration parameter "on_picture_save". Another is "on_motion_detected" and this is the one I use in this simple example In Motion configuration, select the camera and list the configuration parameters. …

Walter i already have the livestream IP. How do i get it to show on node red dash? Its a template, but i cant find help anywhere

Here you have a ready made example flow that will work fine with Motion [image] A Dashboard setup for video cameras Share Your Projects Well, seems this is an increasing interest in todays society being able to monitor your home and other belongings using all kind of vide…

I already tried your flow. I was wondering what setup you have im motion. I have basic authentication on my stream URL. And localhost is on. Even though I tried changing it and still didn't work. I get a "broken file" icon. Any thoughts?

stream_localhost needs to be off to allow viewing cameras from other computers. Have you tried to view a camera directly in a browser from a computer on your network? Like http://192.168.0.236:8081 but with ip that fits your settings?

[image] krambriw: tream_localhost needs to be off to allow viewing cameras from other computers. Have you tried to view a camera directly in a browser from a computer on your network? Like http://192.168.0.236:8081 but with ip that fits your settings? Yes i did. I got it working last night! I…

Only will work if your iphone is connected to your same home wifi network Possible too high framerate. Try reduce frame rate [image]

Node-RED

Node-RED Forum

How to display CCTV camera in dashboard (RTSP)

General

krambriw 15 October 2019 21:30 112

Here you have a ready made example flow that will work fine with Motion

Topic		Replies	Views
Display camera ip in dashboard and store video in raspberry General	67	14470	30 August 2020
A Dashboard setup for video cameras Share Your Projects	92	20955	10 December 2020
How to build a video surveillance system from scratch? General	35	4855	11 October 2021
IP camera: stream and record a fragment General	89	9431	25 March 2021
RTSP CAMS with Dasboard NODE-RED General	8	614	19 June 2023

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

How to display CCTV camera in dashboard (RTSP)

Related topics