# Hue Dimmer stop sending informations

**URL:** <https://discourse.nodered.org/t/hue-dimmer-stop-sending-informations/66635>\
**Category:** General\
**Created:** [19 August 2022 04:18 UTC](https://discourse.nodered.org/t/hue-dimmer-stop-sending-informations/66635 "2022-08-19T04:18:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![NH04121986](https://avatars.discourse-cdn.com/v4/letter/n/e68b1a/32.png) [@NH04121986](https://discourse.nodered.org/u/NH04121986)\
**Post date:** [19 August 2022 04:18 UTC](https://discourse.nodered.org/t/hue-dimmer-stop-sending-informations/66635/1 "2022-08-19T04:18:05Z")

</div>

Hi guys.

I have a SmartHome based on Apple HomeKit and started weeks ago to bring everything into Node-Red. So I‘m a newbie.  
Most of the thongs are running quite well, but I got problems with my Hue Dimmer V1. I did a factory reset with one of them, so that I‘m sure it isn‘t used by HomeKit. When I press a bitton afzer developing I get the debug for initial\_press and release. Sometimes I can press buttons dor several times and I get all the messages. Bit for some reason after a while it stops. Hue button says „waiting…“ and I don‘t get any messages in the debug anymore.  
For testing I connected the button directly with nothing upfront or behinde to the debug-node to check this, still same.  
I use the huemagic node.

Thanks for your help.  
Nico

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [18 October 2022 04:18 UTC](https://discourse.nodered.org/t/hue-dimmer-stop-sending-informations/66635/2 "2022-10-18T04:18:06Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.