# Installation of Node Red on Windows

**URL:** <https://discourse.nodered.org/t/installation-of-node-red-on-windows/94765>\
**Category:** General\
**Created:** [21 January 2025 06:02 UTC](https://discourse.nodered.org/t/installation-of-node-red-on-windows/94765 "2025-01-21T06:02:30Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Technogeek](https://avatars.discourse-cdn.com/v4/letter/t/a88e57/32.png) [@Technogeek](https://discourse.nodered.org/u/Technogeek)\
**Post date:** [21 January 2025 12:20 UTC](https://discourse.nodered.org/t/installation-of-node-red-on-windows/94765/9 "2025-01-21T12:20:21Z")

</div>

I have a Pi 5 that I've done the install on but I've run into an issue that I can't seem to solve. Here's the link to that posting.

> [@Connecting Arduino to Pi 5 and Node Red](https://discourse.nodered.org/t/connecting-arduino-to-pi-5-and-node-red/94746):
>
> I'm very new to the Pi and Node Red and I've run into a perplexing problem with Node Red and an Arduino with Firmata installed. I'm always able to see the USB port in Terminal as /dev/ttyUSB0/ however I'm absolutely unable to get it to work in Node Red even for the Blink test. I have all of this working on a Win 11 install of Node Red and so after a couple of days of searching and finding no solution I figures I'd ask the experts. Thanks in advance

I'd appreciate any help solving this issue.

Thanks

---

_[View the full topic](https://discourse.nodered.org/t/installation-of-node-red-on-windows/94765)._