# It works but it is ugly

**URL:** <https://discourse.nodered.org/t/it-works-but-it-is-ugly/73031>\
**Category:** General\
**Tags:** home-assistant\
**Created:** [1 January 2023 21:19 UTC](https://discourse.nodered.org/t/it-works-but-it-is-ugly/73031 "2023-01-01T21:19:28Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jbudd](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jbudd](https://discourse.nodered.org/u/jbudd)\
**Post date:** [1 January 2023 21:23 UTC](https://discourse.nodered.org/t/it-works-but-it-is-ugly/73031/2 "2023-01-01T21:23:15Z")

</div>

It looks like you are using Home Assistant.

I think that few here use HA, so anyone who downloads your flow will get this:  
 ![Untitled 1](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/a/4/a40aa1a8eb17b32f2ad5aed439ff2bf9928ddcea.jpeg)  
Not much to go on, sadly.

I suspect that the Home Assistant forum is the place to ask for help.  
Same advice as you were given last February!

Edit - There are some discussions in this forum about switching things on and off combining the readings from two different sensors.  
I found [one discussion](https://discourse.nodered.org/t/motion-sensor-light-on-if-within-time-range-schedule/72627/2) because I posted in it, but I have seen others too.

---

_[View the full topic](https://discourse.nodered.org/t/it-works-but-it-is-ugly/73031)._