Hi. I have a sliced xml that arrives in serveral payloads in string format. I want to listen on the payloads and have an output that starts with and ends with from a payload to a payload that arrives later so i can convert it back to xml with a valid start and end tag. Hard to explain. i attach…

here is an example of a split xml joined as a string. the 3 injects hold the 3 xml parts only when last one is sent does the xml get passed on. Only if parts are in order does this work [{"id":"a8c11fb9.9055","type":"inject","z":"8d22ae29.7df6d","name":"part 1","props":[{"p":"payload"},{"p":"topic…

Without understanding exactly how yor xml is sent its difficult to say,. Can you give a slimmed down representation of the recived payloads? Maybe something like this will work. [{"id":"a8c11fb9.9055","type":"inject","z":"8d22ae29.7df6d","name":"part 1","props":[{"p":"payload"},{"p":"topic","vt":…

Hi . I have tried a lot with your function node. But i don´t really understand all of the code in it. I will attach a nobe example that i did that almost works. But sometimes it don´t work and i really don´t know why? The picture i attach from the debug is using my example code. Maybe it´s easier…

I still need a copy of the full incoming xml (i can not copy and paste from images it looks like you just want a section of a larger xml. Your code will not work as you need to store the parts until the final tag is recieved. try this but if i does not work i will need to see a xml that i can copy …

Hi. Have tried your last code and edited the tags. The start tag seem to work fine but can't make it work with the end tag. I the example below i have put the first parts of the xml in inject nodes like you did in your example. Thanks for your help so far Best regards Niclas [{"id":"31516a09.6e3…

Ok with your data it is a bit different i shorten data but should work with longer form [{"id":"5af14f5a.cd6fe","type":"inject","z":"8d22ae29.7df6d","name":"part 1","props":[{"p":"payload"},{"p":"topic","vt":"str"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"<?xml …

Hi again. with my example code it works great. But the xml is different every time so when I tested it on the http stream It did not work. Somehow it must look at the end tag also. I have much to learn about coding but If I understad this right msg.payload = "<"+tag+splitStart[1]; is <event id to <…

I don't think it matters as in your example <event id ="33344" etc> is preceded by </event> so it doesn't matter which you split on, either will do but you need to replace the split search text. I need to see the structure of your xml, preferably with out the junk, just the tags. As at moment i am…

Hi again. this looked better but still some errors with unclosed end tags. I will give you more examples of the xml tomorrow. I really appreciate your help with this!!! Best regards Niclas

Join payload and split

General

niclas.w82 19 November 2020 21:33 3

Hi.

I your example the first xml is starting with
But in my case the xml can start with anywhere. so it must start to search for and then set msg.complete when it finds
Can I somehow even declare the start tag also?

/regards Niclas

Topic		Replies	Views
Read XML from a http stream General	3	138	10 May 2023
Can't split to prepare XML General	10	842	8 March 2019
Using a Split node or split message General	5	497	20 October 2020
Remove all tags <...> from payload? General	4	967	23 October 2020
How to split flow after x payload characters? General	22	501	13 September 2023

Join payload and split

Related topics