# Le Potato with Node-Red?

**URL:** <https://discourse.nodered.org/t/le-potato-with-node-red/78308>\
**Category:** General\
**Created:** [9 May 2023 22:52 UTC](https://discourse.nodered.org/t/le-potato-with-node-red/78308 "2023-05-09T22:52:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rgrove](https://avatars.discourse-cdn.com/v4/letter/r/5f8ce5/32.png) [@Rgrove](https://discourse.nodered.org/u/Rgrove)\
**Post date:** [9 May 2023 22:52 UTC](https://discourse.nodered.org/t/le-potato-with-node-red/78308/1 "2023-05-09T22:52:39Z")

</div>

Anyone try this board and attempt to read/control GPIO pins?  
It's the $35 board currently abundantly available.

It runs NR fine, but so far, I can't get it to do anything with the pins other than exec commands to read/set by the Libre Computing Wiring Tool (but not assign pullup/pulldown, so they drift/float in state).

I was hoping to get an overlay applied to the Raspberry pi nodes work with this board. Anyone figure that out yet?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [8 July 2023 22:52 UTC](https://discourse.nodered.org/t/le-potato-with-node-red/78308/2 "2023-07-08T22:52:57Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.