# Load dashboard on screen

**URL:** <https://discourse.nodered.org/t/load-dashboard-on-screen/62274>\
**Category:** Industrial\
**Created:** [6 May 2022 08:19 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274 "2022-05-06T08:19:27Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![NodeNoobbb](https://avatars.discourse-cdn.com/v4/letter/n/73ab20/32.png) [@NodeNoobbb](https://discourse.nodered.org/u/NodeNoobbb)\
**Post date:** [6 May 2022 08:19 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/1 "2022-05-06T08:19:27Z")

</div>

I am working with a Schneider screen and I would like to know if there is any way to load the dashboard of my node red

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [6 May 2022 09:30 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/2 "2022-05-06T09:30:52Z")

</div>

I think that you will need to provide more information. There are 10's of thousands of bits of hardware, we can't know them all. What type of screen is it? What is it connected to? Does the hardware run an OS? Is it driven by a microprocessor? If so, can the firmware be tweaked?

---

<div class="post-metadata">

**Author:** ![NodeNoobbb](https://avatars.discourse-cdn.com/v4/letter/n/73ab20/32.png) [@NodeNoobbb](https://discourse.nodered.org/u/NodeNoobbb)\
**Post date:** [6 May 2022 11:04 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/3 "2022-05-06T11:04:14Z")

</div>

I have a weidmuller UC20-WL2000-AC PLC from which I have programmed the Red Node, in which I have a dashboard that I would like to be able to put in a Schneider HMIST6400 7W Basic HMI

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [6 May 2022 12:01 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/4 "2022-05-06T12:01:53Z")

</div>

I note that it contains an ARM Cortex so I assume it runs some form of Linux. Does it come with Node-RED embedded?

Unless other people on the forum have used this kind of device, I think you may be better off asking on the Schneider forums.

---

<div class="post-metadata">

**Author:** ![MecatronicaMADE](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@MecatronicaMADE](https://discourse.nodered.org/u/MecatronicaMADE)\
**Post date:** [6 May 2022 16:35 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/5 "2022-05-06T16:35:00Z")

</div>

Hi @NodeNoobbb, i think you need to install Node-RED on your HMI (ARM Cortex-A8) and created an dashboard on your HMI, then share your variables from your PLC (with MODBUS, MQTT or other).  
But, if you can install a web browser on your HMI, i think you can load the dashboard from your PLC. i am not sure.

---

<div class="post-metadata">

**Author:** ![NodeNoobbb](https://avatars.discourse-cdn.com/v4/letter/n/73ab20/32.png) [@NodeNoobbb](https://discourse.nodered.org/u/NodeNoobbb)\
**Post date:** [13 May 2022 10:26 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/6 "2022-05-13T10:26:44Z")

</div>

I have obtained a HMI stw 6400 that has a Web Server, now I only have to put the IP of the PLC and in principle I could see the dashboard on the HMI screen. Now the problem is that it gives me an error when trying to access the web page

 ![1652437420897](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/d/0/d0d356666a65469786e827596a6476799249f84d.jpeg)

---

<div class="post-metadata">

**Author:** ![dynamicdave](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/dynamicdave/32/96_2.png) [@dynamicdave](https://discourse.nodered.org/u/dynamicdave)\
**Post date:** [13 May 2022 10:30 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/7 "2022-05-13T10:30:29Z")

</div>

It doesn't look as if you are using the correct URL.

Try... [http://192.168.0.101:1880](http://192.168.0.101:1880)

---

<div class="post-metadata">

**Author:** ![NodeNoobbb](https://avatars.discourse-cdn.com/v4/letter/n/73ab20/32.png) [@NodeNoobbb](https://discourse.nodered.org/u/NodeNoobbb)\
**Post date:** [13 May 2022 12:37 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/8 "2022-05-13T12:37:20Z")

</div>

It didnt work ☹

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [13 May 2022 14:03 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/9 "2022-05-13T14:03:01Z")

</div>

You need to resolve that `ERR_CERT_COMMON_NAME_INVALID` issue which seems to be an SSL error (per google)

I assume that NR is not running on this device. Is the IP of the device trunning NR `192.168.0.101`?  
can you get to NR using a different PC or MAC?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [12 July 2022 14:03 UTC](https://discourse.nodered.org/t/load-dashboard-on-screen/62274/10 "2022-07-12T14:03:57Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.