# Modbus Flux connector issue

**URL:** <https://discourse.nodered.org/t/modbus-flux-connector-issue/35648>\
**Category:** General\
**Created:** [10 November 2020 05:52 UTC](https://discourse.nodered.org/t/modbus-flux-connector-issue/35648 "2020-11-10T05:52:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![akhtar321h](https://avatars.discourse-cdn.com/v4/letter/a/9de0a6/32.png) [@akhtar321h](https://discourse.nodered.org/u/akhtar321h)\
**Post date:** [10 November 2020 05:52 UTC](https://discourse.nodered.org/t/modbus-flux-connector-issue/35648/1 "2020-11-10T05:52:48Z")

</div>

Hello Everyone,

I am using @node-red-contrib-modbus nodes. In that one flux connector node is there for configuring the connector type, baud rate, slave id and so on.  
But, when i am passing parameters through function node the flux connector node is not configuring.  
Please help me out regarding this issue.  
If anybody have sample flow or any example flow, please suggest me.

Thank you

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [9 January 2021 05:52 UTC](https://discourse.nodered.org/t/modbus-flux-connector-issue/35648/2 "2021-01-09T05:52:58Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.