# Mulitple Xbee (S2C) communication via Node Red

**URL:** <https://discourse.nodered.org/t/mulitple-xbee-s2c-communication-via-node-red/15571>\
**Category:** General\
**Created:** [16 September 2019 04:44 UTC](https://discourse.nodered.org/t/mulitple-xbee-s2c-communication-via-node-red/15571 "2019-09-16T04:44:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rishaal](https://avatars.discourse-cdn.com/v4/letter/r/ecc23a/32.png) [@Rishaal](https://discourse.nodered.org/u/Rishaal)\
**Post date:** [16 September 2019 04:44 UTC](https://discourse.nodered.org/t/mulitple-xbee-s2c-communication-via-node-red/15571/1 "2019-09-16T04:44:40Z")

</div>

Hi,

I am new to node-red, can anyone help me with establishing communication between 2 xbees at first via node red. The Coordinator(xbee1) is connected to Rasp Pi 3 via serial which has node red installed whereas the router(xbee 2) is wired to the arduino pro mini.

---

<div class="post-metadata">

**Author:** ![bakman2](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/bakman2/32/6207_2.png) [@bakman2](https://discourse.nodered.org/u/bakman2)\
**Post date:** [16 September 2019 05:57 UTC](https://discourse.nodered.org/t/mulitple-xbee-s2c-communication-via-node-red/15571/2 "2019-09-16T05:57:37Z")

</div>

Did you [search for it](https://flows.nodered.org/node/node-red-contrib-xbee) ?

---

<div class="post-metadata">

**Author:** ![Rishaal](https://avatars.discourse-cdn.com/v4/letter/r/ecc23a/32.png) [@Rishaal](https://discourse.nodered.org/u/Rishaal)\
**Post date:** [16 September 2019 21:24 UTC](https://discourse.nodered.org/t/mulitple-xbee-s2c-communication-via-node-red/15571/3 "2019-09-16T21:24:47Z")

</div>

Yes.

Got only for serial communication for single xbee. Wanted to know how to configure router xbee's using their mac addresses through node red.