Hi i have a Samsung Multipurpose sensor, i like to have on My garage port. I hav not Mounted yet, I can see on ZHA_events that it do come out with readings on movement. I do have my setup for zigbee (not mqtt), can somebody help me out to set up a node, so when it’s moving out of a position when my…

I don't use Docker or HA so I can't help much if you want to go that route. For an excellent tutorial that will tell you everything you need to know about working with MQTT (but not installing it) see MQTT Essentials - All Core Concepts explained I use Mosquitto as the MQTT broker which is usually…

It's worth learning, MQTT is the bee's knees.

[image] droneman83: I have try to learn how to setup mqtt, but I don’t get it :confused: There is to much different documentation, I have my setup in docker (iotstack)on a raspberrypi 4 8gb with a conbee2 my zigbee devices OK showus your docker compose so we can see which containers out of th…

OK so you have got all the necessary containers running (including MQTT) and Node Red. So can you take us through what you have done ? Assume you have some form of Zigbee Hub/receiver running - if so which one and where is it connected ? Assume you have registered the Samsung Sensor on the Zi…

thank you :slight_smile: yes i have a conbee2 stick on dev/ttyACM0 connected to my rpi 4. yes the sensor is connected to my ZHA, all of my devices are connected to zha. I don't mind if i have to move all to MQTT if neede :slight_smile: I thing all of them are run through deconz container, even if…

Well it looks like you have everything you need to get your data into MQTT - it should be automatically happening Can you load up MQTT explorer (I assume you are on Windows) and then point it to the IP Address of the PI on Port 1883 and see what it is seeing ? Craig

when I go to 192.168.50.15:1883 it say can not connect to page??

Is that using MQTT explorer ? You can not connect using a browser etc to that address Craig

I don’t know how to use mqtt or set it up :face_with_peeking_eye::face_with_peeking_eye:

Node-RED

Node-RED Forum

Multipurpose sensor

General

craigcurtin 18 August 2022 06:59 19

Yes there is - look at the load under broker - expand that p what are the 63 messages about ?

Craig

Topic		Replies	Views
Node red and zigbee2mqtt General	15	2967	27 January 2022
Strange Happening with MQTT & zigbee2mqtt Nodes General	19	2624	5 July 2020
Zigbee2mqtt SNZB-02 Raspberry Pi General node-red-dashboard	6	817	2 August 2022
Zigbee2mqtt bridge node General	17	2592	21 December 2020
Zigbeetasmota sensor not working Developing Nodes	11	949	22 May 2021

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Multipurpose sensor

Related topics