# Node configuration issue

**URL:** <https://discourse.nodered.org/t/node-configuration-issue/14880>\
**Category:** Dashboard\
**Created:** [29 August 2019 01:44 UTC](https://discourse.nodered.org/t/node-configuration-issue/14880 "2019-08-29T01:44:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![hwr7dd](https://avatars.discourse-cdn.com/v4/letter/h/b487fb/32.png) [@hwr7dd](https://discourse.nodered.org/u/hwr7dd)\
**Post date:** [29 August 2019 01:44 UTC](https://discourse.nodered.org/t/node-configuration-issue/14880/1 "2019-08-29T01:44:18Z")

</div>

Hello,

I'm a complete noob to node and I'm running into a few basic issues:  
Right now I am trying to recreate a simple DHT11 sensor flow. When I try to edit the gauge settings it only has limited options.

This is what I want:

 ![2019-08-28-203946_1366x768_scrot](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/2X/5/525695e003287c874e2c8e00be58bf1e8d6a3f9a.png)

This is what I have:

 ![scr](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/2X/c/c4d4fb247c3db7c2b51e2fe38297ad82557eac9c.png)

Also, no matter what I do the UI address always returns undefined. Apologize for the formatting couldn't figure out how to use this system.

---

<div class="post-metadata">

**Author:** ![dceejay](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/dceejay/32/38_2.png) [@dceejay](https://discourse.nodered.org/u/dceejay)\
**Post date:** [29 August 2019 06:21 UTC](https://discourse.nodered.org/t/node-configuration-issue/14880/2 "2019-08-29T06:21:36Z")

</div>

What dashboard did you install ? That is not node-red-dashboard. You will probably need to uninstall it and reinstall the correct one.

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [29 August 2019 11:31 UTC](https://discourse.nodered.org/t/node-configuration-issue/14880/3 "2019-08-29T11:31:23Z")

</div>

Did you install Node-RED yourself or you using the version that comes with the install?

If it is the version that comes with the install, you might want to start by reinstalling following these directions [https://nodered.org/docs/getting-started/raspberrypi](https://nodered.org/docs/getting-started/raspberrypi)

---

<div class="post-metadata">

**Author:** ![hwr7dd](https://avatars.discourse-cdn.com/v4/letter/h/b487fb/32.png) [@hwr7dd](https://discourse.nodered.org/u/hwr7dd)\
**Post date:** [3 September 2019 22:48 UTC](https://discourse.nodered.org/t/node-configuration-issue/14880/4 "2019-09-03T22:48:33Z")

</div>

Hello,

So I had some other version of dashboard installed and I deleted that (I forgot to note the name of it). After this things seemed to run smoother.

The icons for the different nodes showed img errors however it has resolved after several reboots.

I always forget to write things down...

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [4 September 2019 07:51 UTC](https://discourse.nodered.org/t/node-configuration-issue/14880/5 "2019-09-04T07:51:23Z")

</div>

> [@hwr7dd](#):
>
> The icons for the different nodes showed img errors however it has resolved after several reboots.

My guess would be that this was caused by the browser cache rather than anything at the node-red end.