# Node-red-contrib-knx-easy

**URL:** https://discourse.nodered.org/t/node-red-contrib-knx-easy/78959
**Category:** General
**Created:** [5 June 2023 12:41 UTC](https://discourse.nodered.org/t/node-red-contrib-knx-easy/78959 "2023-06-05T12:41:26Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Timi](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/timi/32/80379_2.png) [@Timi](https://discourse.nodered.org/u/Timi)
#### Post date: [5 June 2023 12:41 UTC](https://discourse.nodered.org/t/node-red-contrib-knx-easy/78959/1 "2023-06-05T12:41:26Z")

</div>

Hello,  
I ran into a issue with the connection of my Knx installation and my Nodered.  
I´m running Nodered local in a Milesight Gateway.  
My problem is when I´m using KNX easy node my connection, disconnects. I have to disconnect the network from the Ip interface to get it running again but it fails after a while again.  
Any thoughts?  
Regards

---

<div class="post-metadata">

### Author: ![GogoVega](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/gogovega/32/71313_2.png) [@GogoVega](https://discourse.nodered.org/u/GogoVega)
#### Post date: [5 June 2023 13:17 UTC](https://discourse.nodered.org/t/node-red-contrib-knx-easy/78959/2 "2023-06-05T13:17:22Z")

</div>

Hi, tip: use this [node](https://flows.nodered.org/node/node-red-contrib-knx-ultimate) 😉

---

<div class="post-metadata">

### Author: ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)
#### Post date: [4 August 2023 13:18 UTC](https://discourse.nodered.org/t/node-red-contrib-knx-easy/78959/3 "2023-08-04T13:18:21Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.