# Node-red-contrib-zwave-js

**URL:** <https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233>\
**Category:** General\
**Created:** [7 January 2022 01:05 UTC](https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233 "2022-01-07T01:05:12Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![magicman](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@magicman](https://discourse.nodered.org/u/magicman)\
**Post date:** [7 January 2022 01:05 UTC](https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233/1 "2022-01-07T01:05:12Z")

</div>

I have installed the Zwave node and it found the pir sensors fibargroup FGMS001 FW:2.8 and lists the Configuration options, when i click on the pen icon to edit the sections in my case, Temperature Report threshold,  
a box appears into which i type 1 (default is 10). It accepts the 1 and i click set but nothing happens and stays at 10?  
What am i doing wrong?

Any help will be appreciated as always

---

<div class="post-metadata">

**Author:** ![marcus-j-davies](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/marcus-j-davies/32/103435_2.png) [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)\
**Post date:** [7 January 2022 06:47 UTC](https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233/2 "2022-01-07T06:47:09Z")

</div>

Hi @magicman

Given its a battery operated device, it is likely asleep.  
Any changes you make, whilst a device is asleep - will be queued, and applied when the device awakens.

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/4/8/4831517e03f79282150997c070d4e7f265dc7687.png)

I don't update the UI, until we know it's been applied (if its awake, it will update ~1 sec)  
The UI will be updated, after the device awakens and picks up any pending changes.

You can forcibly awaken it - but you need to refer to the manual of the device.  
Note: triggering motion is not waking it up.

It will have a wake interval, and you can update it (if supported) - but the device will need to wake up to receive the new interval.

Hope this helps.

---

<div class="post-metadata">

**Author:** ![magicman](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@magicman](https://discourse.nodered.org/u/magicman)\
**Post date:** [7 January 2022 20:41 UTC](https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233/3 "2022-01-07T20:41:48Z")

</div>

Thank you @marcus-j-davies it seems obvious now i think about and of course it works!

Loving the node by the way.

---

<div class="post-metadata">

**Author:** ![marcus-j-davies](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/marcus-j-davies/32/103435_2.png) [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)\
**Post date:** [7 January 2022 21:06 UTC](https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233/4 "2022-01-07T21:06:48Z")

</div>

Anytime 👍

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [21 January 2022 21:07 UTC](https://discourse.nodered.org/t/node-red-contrib-zwave-js/56233/5 "2022-01-21T21:07:45Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.