# Node-red, deConz and hue outdoor motionsensor

**URL:** <https://discourse.nodered.org/t/node-red-deconz-and-hue-outdoor-motionsensor/26816>\
**Category:** General\
**Created:** [17 May 2020 18:35 UTC](https://discourse.nodered.org/t/node-red-deconz-and-hue-outdoor-motionsensor/26816 "2020-05-17T18:35:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hassefar](https://avatars.discourse-cdn.com/v4/letter/h/c57346/32.png) [@Hassefar](https://discourse.nodered.org/u/Hassefar)\
**Post date:** [17 May 2020 18:35 UTC](https://discourse.nodered.org/t/node-red-deconz-and-hue-outdoor-motionsensor/26816/1 "2020-05-17T18:35:42Z")

</div>

Hi

Is there a way within node-red to change the sensitivity of a Hue Outdoor Motion sensor which is connected via a ConBee through DeConz?

---

<div class="post-metadata">

**Author:** ![zenofmud](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/zenofmud/32/316_2.png) [@zenofmud](https://discourse.nodered.org/u/zenofmud)\
**Post date:** [17 May 2020 21:19 UTC](https://discourse.nodered.org/t/node-red-deconz-and-hue-outdoor-motionsensor/26816/2 "2020-05-17T21:19:30Z")

</div>

Your question would be easier to answer with a few more details. What node are you using to get the data into NR? Once you get it in NR you could use the range node to change the range of the data...  
But if you are asking to change the actual sensitivity on the sensor itself, you should look at the documentation of the sensor and see if and how you can do that.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [16 July 2020 21:19 UTC](https://discourse.nodered.org/t/node-red-deconz-and-hue-outdoor-motionsensor/26816/3 "2020-07-16T21:19:32Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.