# Node-red node control X, Y, D of Mitsubishi FX5U PLC
**URL:** https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683
**Category:** Industrial
**Created:** [23 April 2022 12:26 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683 "2022-04-23T12:26:36Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@king](https://discourse.nodered.org/u/king)
#### Post date: [23 April 2022 12:26 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/1 "2022-04-23T12:26:36Z")
Excuse me
Mitsubishi PLC FX5U Ethernet to HUB wants to control X, Y, D through the built-in Node-red node of Raspberry Pi. Is there any tutorial on this?
---
### Author:  [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)
#### Post date: [23 April 2022 13:43 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/2 "2022-04-23T13:43:00Z")
There is a contrib node for MC Protocol [node-red-contrib-mcprotocol (node) - Node-RED](https://flows.nodered.org/node/node-red-contrib-mcprotocol)
install that & give it a go.
--
If you are new to node-red, I recommend watching this playlist: [Node-RED Essentials](https://www.youtube.com/playlist?list=PLyNBB9VCLmo1hyO-4fIZ08gqFcXBkHy-6). The videos are done by the developers of node-red. They're nice & short and to the point. You will understand a whole lot more in about 1 hour. A small investment for a lot of gain.
---
### Author:  [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)
#### Post date: [23 April 2022 13:44 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/3 "2022-04-23T13:44:34Z")
> [@king](#):
>
> FX5U
Here is a thread on the repository where a user got it to work with FX PLC
>
>
> Hi,
> I can confirm I was able to use this node also to communicate with FX3U PLC…. I didn't do a stress test.
> I use these settings:
> \-FRAME: 1E
> \-PROTOCOL: TCP
> \-PLC Type: A
>
> These settings are not set (default)
> \-Network No
> \-PC No
> \-Dest Module
> \-Dest Module Stn No
>
> Regards,
> Jinx
---
### Author:  [@king](https://discourse.nodered.org/u/king)
#### Post date: [25 April 2022 00:48 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/5 "2022-04-25T00:48:03Z")
Sorry, do you have a physical operation video, because it is a novice relationship
---
### Author:  [@kamtamer1](https://discourse.nodered.org/u/kamtamer1)
#### Post date: [18 May 2022 19:45 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/6 "2022-05-18T19:45:26Z")
i need help for that Topic too. Please do you have aoperational video??
---
### Author:  [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)
#### Post date: [18 May 2022 19:51 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/7 "2022-05-18T19:51:11Z")
> [@kamtamer1](#):
>
> Please do you have aoperational video
No, sorry.
What is your issue? Have you setup UDP ports on the PLC? What error are you seeing? What settings have you entered on the node config?
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [17 July 2022 19:51 UTC](https://discourse.nodered.org/t/node-red-node-control-x-y-d-of-mitsubishi-fx5u-plc/61683/8 "2022-07-17T19:51:24Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.