# Node RED with ADAM 6717

**URL:** <https://discourse.nodered.org/t/node-red-with-adam-6717/46219>\
**Category:** General\
**Created:** [25 May 2021 13:37 UTC](https://discourse.nodered.org/t/node-red-with-adam-6717/46219 "2021-05-25T13:37:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![KrishnanRavichandran](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/krishnanravichandran/32/44858_2.png) [@KrishnanRavichandran](https://discourse.nodered.org/u/KrishnanRavichandran)\
**Post date:** [25 May 2021 13:37 UTC](https://discourse.nodered.org/t/node-red-with-adam-6717/46219/1 "2021-05-25T13:37:22Z")

</div>

Hello,  
I am new to Node RED programming and working on a project where I use ADAM 6717 gateway for Data acquisition, analysis, transmission. The Node red is built-in in the ADAM 6717 and I have programmed using nodes to obtian the results on the dashboards.

1. I have a doubt on how to transmit data from a remote locaion to my desktop. Is it possible to access Node RED which is installed inside the ADAM 6717 to be accessed via the internet?
2. I am new to the communication protocols, The Adam 6717 is capable of using Modbus and MQTT protocols. If I use any of this, I just get access to the Data or to the entire node red platform? This is my second doubt.

---

<div class="post-metadata">

**Author:** ![Steve-Mcl](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/steve-mcl/32/4826_2.png) [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)\
**Post date:** [25 May 2021 13:59 UTC](https://discourse.nodered.org/t/node-red-with-adam-6717/46219/2 "2021-05-25T13:59:54Z")

</div>

> [@KrishnanRavichandran](#):
>
> I have a doubt on how to transmit data from a remote locaion to my desktop. Is it possible to access Node RED which is installed inside the ADAM 6717 to be accessed via the internet?

If it is connected to the internet - sure.

> [@KrishnanRavichandran](#):
>
> The Adam 6717 is capable of using Modbus and MQTT protocols. If I use any of this, I just get access to the Data or to the entire node red platform

Modbus TCP protocols (usually port 502) and MQTT protocols (usually port 1883) are completely different protocols and run on different port numbers to the node-red editors interface (which is normally on port 1880)

---

<div class="post-metadata">

**Author:** ![KrishnanRavichandran](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/krishnanravichandran/32/44858_2.png) [@KrishnanRavichandran](https://discourse.nodered.org/u/KrishnanRavichandran)\
**Post date:** [25 May 2021 14:40 UTC](https://discourse.nodered.org/t/node-red-with-adam-6717/46219/3 "2021-05-25T14:40:17Z")

</div>

Thank you for ypur reply Steve!  
How is it possible is something I have to figure out.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [24 July 2021 14:41 UTC](https://discourse.nodered.org/t/node-red-with-adam-6717/46219/4 "2021-07-24T14:41:13Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.