# Nora, how to use Google Thermostat node?

**URL:** <https://discourse.nodered.org/t/nora-how-to-use-google-thermostat-node/25739>\
**Category:** General\
**Created:** [29 April 2020 12:18 UTC](https://discourse.nodered.org/t/nora-how-to-use-google-thermostat-node/25739 "2020-04-29T12:18:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SteveJohnSteele](https://avatars.discourse-cdn.com/v4/letter/s/8e8cbc/32.png) [@SteveJohnSteele](https://discourse.nodered.org/u/SteveJohnSteele)\
**Post date:** [29 April 2020 12:18 UTC](https://discourse.nodered.org/t/nora-how-to-use-google-thermostat-node/25739/1 "2020-04-29T12:18:27Z")

</div>

Hello Andrei

I have some question, I hope you can answer.

In Google Home app under Thermostat (any mode) "Indoor 25" always appears.  
I have tried sending { "temperature:" 35 } and others but it has no affect.  
How do I tell it what the temperature is?

I am wanting to control a fan (I saw someone else say that Fan was being developed but might have been dropped)  
What I want to do (currently) is feed in the outside temperature, and if its above a threshold turn on the fan.  
I figure if its really hot outside I am going to want the fan on.  
At present I have no sensors other than outside temperature from a weather service.  
Its a 'proof of concept' at the moment. If I can get it working with outside temperature and figure out how to code the controls, I will get an indoor sensor.

Any assistance you, or anyone, can give is much appreciated.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [28 June 2020 12:18 UTC](https://discourse.nodered.org/t/nora-how-to-use-google-thermostat-node/25739/2 "2020-06-28T12:18:35Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.