# NR+XBee Conection

**URL:** https://discourse.nodered.org/t/nr-xbee-conection/48450
**Category:** Hardware
**Created:** [15 July 2021 10:25 UTC](https://discourse.nodered.org/t/nr-xbee-conection/48450 "2021-07-15T10:25:09Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![Martin10](https://avatars.discourse-cdn.com/v4/letter/m/a587f6/32.png) [@Martin10](https://discourse.nodered.org/u/Martin10)
#### Post date: [15 July 2021 11:35 UTC](https://discourse.nodered.org/t/nr-xbee-conection/48450/5 "2021-07-15T11:35:37Z")

</div>

In this topic there is a comments.

> [@Node-Red and Xbee S2C](https://discourse.nodered.org/t/node-red-and-xbee-s2c/42023/7):
>
> As the help in that document says... Alternatively, use a change node to build this object. set msg.payload to JSON then copy/paste that code in This is about as basic as node-red gets. If you dont understand that then you need to spend a little time playing and learning. I strongly recommend watching this playlist: [Node-RED Essentials](https://www.youtube.com/playlist?list=PLyNBB9VCLmo1hyO-4fIZ08gqFcXBkHy-6). The videos are done by the developers of node-red. They're nice & short and to the point. You will understand a whole lot more in about 1 hour. A s…

I just want to know the algorithm:

1. First, I need to install the RPI XBee connection library?
2. Then install XBee MQTT Gateway project?
3. Finally, to obtain data in NR through Xbee nodes and / or zigbee2mqtt nodes?

Am I on the right way or not?

---

_[View the full topic](https://discourse.nodered.org/t/nr-xbee-conection/48450)._