# OMRON-FINS connection settings

**URL:** <https://discourse.nodered.org/t/omron-fins-connection-settings/48543>\
**Category:** Industrial\
**Created:** [18 July 2021 10:22 UTC](https://discourse.nodered.org/t/omron-fins-connection-settings/48543 "2021-07-18T10:22:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JoshuaG](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JoshuaG](https://discourse.nodered.org/u/JoshuaG)\
**Post date:** [18 July 2021 10:22 UTC](https://discourse.nodered.org/t/omron-fins-connection-settings/48543/1 "2021-07-18T10:22:34Z")

</div>

I'm struggling to get a connection between the node and 1 particular PLC.  
its the only one where an external Eth/IP card is used:

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/4/9/49d45bd4a0b7132c8f9d2a7e48c69bba207f528b.png)  
I assumed the 'DA2' needs changing and I've tried a few educated guessed but it keeps returning the following.  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/0/3078a2011bcf318c279c5486aaf0078793176b3f.png)

I'm using v0.4.0 of omron-fins as I haven't upgraded my nodejs yet.

---

<div class="post-metadata">

**Author:** ![JoshuaG](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JoshuaG](https://discourse.nodered.org/u/JoshuaG)\
**Post date:** [18 July 2021 10:44 UTC](https://discourse.nodered.org/t/omron-fins-connection-settings/48543/2 "2021-07-18T10:44:33Z")

</div>

Figured it out, by some sheer luck I forgot to put the DA1 value in to match the IP and its works when set to 0.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [1 August 2021 10:44 UTC](https://discourse.nodered.org/t/omron-fins-connection-settings/48543/3 "2021-08-01T10:44:59Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.