# Omron FINS Write from ThingsBoard

**URL:** <https://discourse.nodered.org/t/omron-fins-write-from-thingsboard/63190>\
**Category:** Industrial\
**Created:** [28 May 2022 15:34 UTC](https://discourse.nodered.org/t/omron-fins-write-from-thingsboard/63190 "2022-05-28T15:34:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JY.LOW](https://avatars.discourse-cdn.com/v4/letter/j/b77776/32.png) [@JY.LOW](https://discourse.nodered.org/u/JY.LOW)\
**Post date:** [28 May 2022 15:34 UTC](https://discourse.nodered.org/t/omron-fins-write-from-thingsboard/63190/1 "2022-05-28T15:34:56Z")

</div>

I am using node-red for the very first time to do data monitoring and remote control on VFD by using OMRON CP1H. I managed to do the data monitoring part. However, I plan to use a control knob (RPC) to control the speed of the drive. I hope to send the controlled value to the plc via OMRON FINS write. However, what node i should use to get the value set from the user side and what setting i should use to write addresses CIO 200 and 201? Thanks in advance for the answer

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [27 July 2022 15:35 UTC](https://discourse.nodered.org/t/omron-fins-write-from-thingsboard/63190/2 "2022-07-27T15:35:07Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.