# Panasonic iot using raspberry pi

**URL:** <https://discourse.nodered.org/t/panasonic-iot-using-raspberry-pi/14760>\
**Category:** General\
**Created:** [25 August 2019 07:52 UTC](https://discourse.nodered.org/t/panasonic-iot-using-raspberry-pi/14760 "2019-08-25T07:52:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![seamy](https://avatars.discourse-cdn.com/v4/letter/s/ac91a4/32.png) [@seamy](https://discourse.nodered.org/u/seamy)\
**Post date:** [25 August 2019 07:52 UTC](https://discourse.nodered.org/t/panasonic-iot-using-raspberry-pi/14760/1 "2019-08-25T07:52:56Z")

</div>

hello world, i wanna ask how to read panasonic fp-x c60r plc. I'm using raspberry pi with node red.and modbus rtu connection between pl and raspberry pi. i already install modbus in node red but i don't know how to setting the modbus in node red . I want to monitor input and output on the plc using nopde red. Can anyone help me ?

![Screenshot%20(1)](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/2X/5/53832770bcad48ed08f963f35f5c0680e52c4bd8.png)

i don't know how to fill this

i need the i/o display in node red dashboard

---

<div class="post-metadata">

**Author:** ![thatcadguy](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/thatcadguy/32/5273_2.png) [@thatcadguy](https://discourse.nodered.org/u/thatcadguy)\
**Post date:** [26 August 2019 13:14 UTC](https://discourse.nodered.org/t/panasonic-iot-using-raspberry-pi/14760/2 "2019-08-26T13:14:27Z")

</div>

You should look for the Modbus manual for the Panasonic PLC. Then you can determine what data you need to pull.