Situation: Pool pump is only to run while sufficient power from solar panels. Pool pump needs only to run x hours per day. mytimeout seems to be a solution to the second part, but I can't determine how to pause the countdown timer. For example; sufficient power from solar panels triggers the poo…

I have found two things that might help you https://www.youtube.com/watch?v=mUSxM6KTN9s Shows how to track accumulated/elapsed time quite easily Also Our very own Steve Rickus helping someone out on the old forums https://groups.google.com/forum/#!topic/node-red/YjEldxFUU_o Craig

It's a similar use case we discussed here: [image] Cumulative running time General I am looking for suggestions on a node, or way to capture cumulative running time of equipment. For example: a machine runs for 2 hrs, then is down for 20 minutes, then starts again for 3 …

Thanks for you suggestions. I now have it basically working. Poorly coded and still looking for bugs. The key I found was to use "stop", and not "off". Then feed back the last value of countdown timer back into the mytimeout using the JSON code. Using this type of method I am able to inject/add t…

[image] whatsupskip: [{"id":"c182c0c.cdb5a4","type":"tab","label":"Pump Timer","disabled":false,"info":""},{"id":"e9b94257.58865","type":"mytimeout","z":"c182c0c.cdb5a4","name":"Count Down Timer","outtopic":"TimerCountDown","outsafe":"on","outwarning":"Warning","outunsafe":"off","warning":"5","t…

Third time lucky. [{"id":"c182c0c.cdb5a4","type":"tab","label":"Pump Timer","disabled":false,"info":""},{"id":"e9b94257.58865","type":"mytimeout","z":"c182c0c.cdb5a4","name":"Count Down Timer","outtopic":"TimerCountDown","outsafe":"on","outwarning":"Warning","outunsafe":"off","warning":"5","timer":…

In your first function node you have: var value = global.get("PoolPumpStatus",msg.payload); msg = { payload:value }; return msg; The first line says you are getting PoolPumpStatus but I don't see you set it anywhere in the flow...

PoolPumpStatus comes from another flow I am running. It comes from a TP-Link HS100 smart switch and is a boolean (true/false). At the moment I am using the node-red-contrib-hs100, however there is now a better option in node-red-contrib-tplink-iot. The main improvement is in the handling of power e…

[image] whatsupskip: PoolPumpStatus comes from another flow I am running. It comes from a TP-Link HS100 smart switch and is a boolean (true/false). Do you mean another flow in the same tab or another flow in a different tab? If it is a flow on another tab, it will come back as "undefined" S…

Node-RED

Node-RED Forum

Pausing timer in mytimeout

General

cflurin 26 September 2018 14:01 5

Take a look at: how to share code or flow json

Topic		Replies	Views
Timer function with Node-Red in Home assistance General home-assistant	2	477	27 May 2024
Ideas for elapsed time counter please General	2	1160	5 November 2020
TIme remaining on Trigger node - debug or msg.property Core Development	16	6860	22 May 2019
Counting, would like some direction General	10	705	18 May 2020
Timer that can be extended on every push of a switch - current + X min? General	22	425	21 March 2023

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Pausing timer in mytimeout

Related topics