# Personal Weather Station

**URL:** <https://discourse.nodered.org/t/personal-weather-station/85307>\
**Category:** General\
**Tags:** weather-station, display-data\
**Created:** [8 February 2024 01:04 UTC](https://discourse.nodered.org/t/personal-weather-station/85307 "2024-02-08T01:04:45Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![dynamicdave](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/dynamicdave/32/96_2.png) [@dynamicdave](https://discourse.nodered.org/u/dynamicdave)\
**Post date:** [8 February 2024 06:21 UTC](https://discourse.nodered.org/t/personal-weather-station/85307/4 "2024-02-08T06:21:26Z")

</div>

I recently shared one of my projects that might perform **some** of the tasks you are looking for.

> [@Single Sensor Node (ESP32-S2-Mini or RPi Pico-W)](https://discourse.nodered.org/t/single-sensor-node-esp32-s2-mini-or-rpi-pico-w/84951):
>
> The project is based on an ESP32-S2-Mini and can be deployed to sense temperature, humidity and air pressure in any geographical location. All it needs is access to a WiFi Access Point and a (local or remote) MQTT broker. Today I've been converting the Micro-Python script I wrote for the ESP32-S2-Mini to work on a RPi Pico-W. One of my friends wanted to try it out but only had a Pico-W. I've called it 'Single Sensor Node' as it sits in my greenhouse and reports Temp/Humidity/Pressure and the …

I've written an 'Installation Guide' (there's a link on the website) that explains all about the project.  
If you would like to read about it, I've published it on my 'Share my projects' website here...

[https://teamwork-int.com/share\_my\_projects/](https://teamwork-int.com/share_my_projects/)  
If you visit the above link you'll need to click on the folder labelled... **C\_single\_sensor\_node**

**SSN\_generic\_RDS\_v05.py** is the latest version of the Python script - works with ESP32-S2 and Pico-W

The project uses a BME280 sensor to measure **temperature/humidity/air pressure** and send the readings via a MQTT broker to Node-RED where the data can be processed. In my particular situation the device is located in a greenhouse at the bottom of my garden. It uses an ESP32-S2-Mini flashed with Micro-Python. Depending on what you want to do, you can use a local or remote MQTT broker.

---

_[View the full topic](https://discourse.nodered.org/t/personal-weather-station/85307)._