# Pi keyboard node with internet connection looses characters

**URL:** <https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712>\
**Category:** General\
**Created:** [19 March 2023 13:02 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712 "2023-03-19T13:02:45Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [19 March 2023 13:02 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/1 "2023-03-19T13:02:45Z")

</div>

Hi, I'm a new Node-RED user from Japan.

Could you give me some information and advice on Pi Keyboard node,  
node-red-node-pi-gpio? My problem is with internet connection Pi Keyboard  
node looses characters. But without internet connection it works fine.

I tried to capture characters from bar code scanner by using Pi Keyboard node.  
The flow is defined and stored on Raspberry Pi 3B locally. Almost of all the flow  
is done in local. Once all the red characters are convined and entire code is  
created, it is sent to Google Spreadsheet by using G Sheet node.

During development in my office for about 1 month, The flow and Pi Keyboard  
node worked fine. Last January I delivered my devices and barcode scanners.  
My customer said about 4 days after delivery suddenly my devices started  
behaving incorrectly. Incorrectly means LEDs on my devices did not flush after  
reading the barcode.

I analysed the incorrect bahavior and realized :

1. Pi keyboard node looses characters.
2. The problem happens 1 minute after reading previous code.
3. During such term, 1minute, it keeps working fine if I keep reading code  
continuously.
4. If I finish reading code and wait for 1 minute and try to read again, it fails.
5. If I use the device and barcode scanner stand-alone, without internet  
connection, it works OK.
6. If I use the device and barcode scanner with internet connection, it fails.

My flow forwards the code to a Google Spreadsheet. So I definetly need  
internet connection.

Does anybody have an idea to solve the problem?

Thank you,

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [19 March 2023 13:06 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/2 "2023-03-19T13:06:27Z")

</div>

Here is the information on my Pi Keyboard node information.

- node-red-node-pi-gpio, 2.0.6

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [20 March 2023 01:00 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/3 "2023-03-20T01:00:39Z")

</div>

One more question.

Does the Node-RED flow tries to access (send/receive) anything to/from Internet when the flow is activated?

I'm wondering such access process performed at the first stage of an entire flow prevents Pi Keyboard node receiving characters.

Does every flow try to access somewhere on the Internet when executed?

What do you think?  
Does anyone have similar problem?

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [21 March 2023 13:49 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/4 "2023-03-21T13:49:41Z")

</div>

Raspberry pi 3B seems to use USB hub for communicating USB devices, NOT directly connected. Does it cause the problem?

---

<div class="post-metadata">

**Author:** ![jbudd](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jbudd](https://discourse.nodered.org/u/jbudd)\
**Post date:** [21 March 2023 14:02 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/5 "2023-03-21T14:02:06Z")

</div>

> [@NoriAbe](#):
>
> Does every flow try to access somewhere on the Internet when executed?

I have no idea about your flow but no, Node-red does not require internet access to work correctly.

> [@NoriAbe](#):
>
> Raspberry pi 3B seems to use USB hub for communicating USB devices, NOT directly connected. Does it cause the problem?

Have you checked the power demands of all devices connected to the Pi?  
There is a limit to the amount available for USB devices.  
Also check **vcgencmd get\_throttled**. If the response is non-zero it may indicate an inadequate power supply.

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [21 March 2023 14:19 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/6 "2023-03-21T14:19:55Z")

</div>

> [@jbudd](#):
>
> vcgencmd get\_throttled

Thanks, jbudd!

I tried the command and checked the response.

pi@raspberrypi:~ $ vcgencmd get\_throttled  
throttled=0x50000

Does this mean the power supply to the barcode scanner is inadequate?

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [21 March 2023 14:23 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/7 "2023-03-21T14:23:17Z")

</div>

I also tried the command on my Ras Pi 4B. The response is below.

pi@raspberrypi:~ $ vcgencmd get\_throttled  
throttled=0x0

---

<div class="post-metadata">

**Author:** ![jbudd](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jbudd](https://discourse.nodered.org/u/jbudd)\
**Post date:** [21 March 2023 14:26 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/8 "2023-03-21T14:26:58Z")

</div>

Not necessarily.  
It means that the CPU clock has been throttled at some time since the last boot.

One reason could be that the voltage supplied to the Pi dropped below the minimum, even for a tiny part of a second.

This can be caused by voltage drop in too thin USB cables or by a poor quality power supply which fails to maintain 5V when under load.

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [21 March 2023 14:32 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/9 "2023-03-21T14:32:38Z")

</div>

Thanks, jbudd!

Could you tell me why the 2 responses are different? The response from Ras Pi 4B seems to be OK. But the response from Ras Pi 3B seems to be NOT OK. I use the same power supplys and the same barcode scanners.

And as I told above, I had spent for more than 1 month during development. But I did not have the problem. Suddenly it appeared in my customer site. Why? Any idea?

---

<div class="post-metadata">

**Author:** ![jbudd](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jbudd](https://discourse.nodered.org/u/jbudd)\
**Post date:** [21 March 2023 14:53 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/10 "2023-03-21T14:53:39Z")

</div>

> [@NoriAbe](#):
>
> Could you tell me why the 2 responses are different?

I would check the quality of the USB cables.  
Maybe the power is noisy at the customer's site, from welding or such like. A total guess.  
But you might get better advice about tracking this down on the Raspberry Pi forum.

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [21 March 2023 14:57 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/11 "2023-03-21T14:57:58Z")

</div>

Let me check the meaning of "USB cables".  
Do you mean USB cables for power supply or for barcode scanner? Or both?

---

<div class="post-metadata">

**Author:** ![marcus-j-davies](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/marcus-j-davies/32/103435_2.png) [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)\
**Post date:** [21 March 2023 15:05 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/12 "2023-03-21T15:05:48Z")

</div>

One critical point that might be worth keeping in mind.

The RPI 3b uses the same bus to drive the Ethernet and USB ports.  
So if the USB ports are being hammered, it has the potential to knock out the Ethernet.

RPI 4 The USB and Ethernet are on separate buses.  
I'm not a mechanical / electrical engineer - but something to maybe consider

---

<div class="post-metadata">

**Author:** ![jbudd](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jbudd](https://discourse.nodered.org/u/jbudd)\
**Post date:** [21 March 2023 15:07 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/13 "2023-03-21T15:07:24Z")

</div>

_If_ the CPU was throttled because of low voltage, it's the power supply and it's cable that you need to check.

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [21 March 2023 22:36 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/14 "2023-03-21T22:36:52Z")

</div>

Thank you guys!

I'll check mechanical/electrical structures, USB ports/USB hub/LAN port, on Ras Pi 3B.

Do you have any idea on the useful website which describes USB hub or etc about Ras Pi 3B?

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [22 March 2023 13:29 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/15 "2023-03-22T13:29:47Z")

</div>

Hello, guys.

I tried several combinations of power supplys and USB cables, but I could not make it.

Strange things are :

1. If I try to keep reading frequently, for example every 30s, RasPi 3B can read entire code.
2. If I wait for more than 30s and try reading, it fails.
3. When it fails, try reading the code again it's OK.

It seems "30s timer?" is running, it stops accepting a new code once te timer has been expired.

What's the timer?  
Can I stop the timer?

And let me tell you 1 thing. It was working correctly for more than 1 month.  
It start failing suddnely? Why?

Please give me any advice.

---

<div class="post-metadata">

**Author:** ![marcus-j-davies](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/marcus-j-davies/32/103435_2.png) [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)\
**Post date:** [22 March 2023 13:36 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/16 "2023-03-22T13:36:19Z")

</div>

Maybe at this point - an export of your flow will help (removing any sensitive info you feel is necessary).  
Presently, this is guess work, but maybe your flow will reveal something that someone else can spot

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [22 March 2023 13:55 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/17 "2023-03-22T13:55:18Z")

</div>

Thanks, marcus-j-davies.

Here is the flow. Original contains more nodes. I just give you key areas.

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/5/8/58f49c442cc9d66904d3ad4a3cd33d5320c82a28.png)

----------------------------------------------------------------------------------------------------- [{"id":"e2f1907f.6527c","type":"comment","z":"be764ee2.db6f7","name":"①コード情報作成","info":"","x":710,"y":340,"wires":[]},{"id":"80131045.beb17","type":"comment","z":"be764ee2.db6f7","name":"Test version : 1.00 (23/3/19)","info":"","x":160,"y":40,"wires":[]},{"id":"3332f094.5001d","type":"join","z":"be764ee2.db6f7","name":"make\_entire\_code","mode":"custom","build":"string","property":"payload","propertyType":"msg","key":"topic","joiner":"","joinerType":"str","accumulate":false,"timeout":"1","count":"","reduceRight":false,"reduceExp":"","reduceInit":"","reduceInitType":"","reduceFixup":"","x":730,"y":380,"wires":[["ce1d7674.a4dbf8","cc2b30af.a2469"]]},{"id":"ebaec867.a32708","type":"function","z":"be764ee2.db6f7","name":"msg : 0","func":"msg.payload = \"0\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":180,"wires":[["3332f094.5001d"]]},{"id":"4b614c08.4dd4e4","type":"function","z":"be764ee2.db6f7","name":"msg : 1","func":"msg.payload = \"1\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":220,"wires":[["3332f094.5001d"]]},{"id":"36f3c92d.4146a6","type":"function","z":"be764ee2.db6f7","name":"msg : 2","func":"msg.payload = \"2\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":260,"wires":[["3332f094.5001d"]]},{"id":"ea4f3f2f.d0ba4","type":"function","z":"be764ee2.db6f7","name":"msg : 3","func":"msg.payload = \"3\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":300,"wires":[["3332f094.5001d"]]},{"id":"2a3ffbd.3c2bb04","type":"function","z":"be764ee2.db6f7","name":"msg : 4","func":"msg.payload = \"4\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":340,"wires":[["3332f094.5001d"]]},{"id":"42b11155.789a5","type":"function","z":"be764ee2.db6f7","name":"msg : 5","func":"msg.payload = \"5\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":380,"wires":[["3332f094.5001d"]]},{"id":"315e12e3.685a0e","type":"function","z":"be764ee2.db6f7","name":"msg : 6","func":"msg.payload = \"6\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":420,"wires":[["3332f094.5001d"]]},{"id":"173512ca.9d1bed","type":"function","z":"be764ee2.db6f7","name":"msg : 7","func":"msg.payload = \"7\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":460,"wires":[["3332f094.5001d"]]},{"id":"a1a5430f.fafae","type":"function","z":"be764ee2.db6f7","name":"msg : 8","func":"msg.payload = \"8\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":500,"wires":[["3332f094.5001d"]]},{"id":"558133c6.ccf18c","type":"function","z":"be764ee2.db6f7","name":"msg : 9","func":"msg.payload = \"9\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":480,"y":540,"wires":[["3332f094.5001d"]]},{"id":"ce1d7674.a4dbf8","type":"debug","z":"be764ee2.db6f7","name":"output code","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":810,"y":180,"wires":[]},{"id":"cc2b30af.a2469","type":"debug","z":"be764ee2.db6f7","name":"output length","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload.length","targetType":"msg","statusVal":"","statusType":"auto","x":810,"y":220,"wires":[]},{"id":"ad75e947.18c048","type":"switch","z":"be764ee2.db6f7","name":"change\_code","property":"payload","propertyType":"msg","rules":[{"t":"eq","v":"1111","vt":"str"},{"t":"eq","v":"22","vt":"str"},{"t":"eq","v":"33","vt":"str"},{"t":"eq","v":"44","vt":"str"},{"t":"eq","v":"55","vt":"str"},{"t":"eq","v":"66","vt":"str"},{"t":"eq","v":"77","vt":"str"},{"t":"eq","v":"88","vt":"str"},{"t":"eq","v":"99","vt":"str"},{"t":"eq","v":"1010","vt":"str"},{"t":"eq","v":"2828","vt":"str"}],"checkall":"true","repair":false,"outputs":11,"x":240,"y":380,"wires":[["ebaec867.a32708"],["4b614c08.4dd4e4"],["36f3c92d.4146a6"],["ea4f3f2f.d0ba4"],["2a3ffbd.3c2bb04"],["42b11155.789a5"],["315e12e3.685a0e"],["173512ca.9d1bed"],["a1a5430f.fafae"],["558133c6.ccf18c"],["94db94d4.16c3b8"]]},{"id":"5b6ca905.69bf18","type":"join","z":"be764ee2.db6f7","name":"2 to 1\_code","mode":"custom","build":"string","property":"payload","propertyType":"msg","key":"topic","joiner":"","joinerType":"str","accumulate":false,"timeout":"0.5","count":"2","reduceRight":false,"reduceExp":"","reduceInit":"","reduceInitType":"","reduceFixup":"","x":170,"y":160,"wires":[["ad75e947.18c048"]]},{"id":"94db94d4.16c3b8","type":"function","z":"be764ee2.db6f7","name":"msg : enter","func":"msg.payload = \"\\n\";\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":490,"y":580,"wires":[[]]},{"id":"2b96d463.eb535c","type":"function","z":"be764ee2.db6f7","name":"Initialize","func":"var wait\_flg = flow.get('wait\_flg') || 0;\nflow.set('wait\_flg', wait\_flg);","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":340,"y":100,"wires":[[]]},{"id":"710563a9.3ab66c","type":"debug","z":"be764ee2.db6f7","name":"debug 1","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":400,"y":40,"wires":[]},{"id":"11d6f7fc.0b2f58","type":"debug","z":"be764ee2.db6f7","name":"debug 2","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":560,"y":120,"wires":[]},{"id":"bf1eca5f.02a078","type":"rpi-keyboard","z":"be764ee2.db6f7","name":"","x":130,"y":100,"wires":[["710563a9.3ab66c","2b96d463.eb535c","5b6ca905.69bf18"]]}]

---

<div class="post-metadata">

**Author:** ![marcus-j-davies](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/marcus-j-davies/32/103435_2.png) [@marcus-j-davies](https://discourse.nodered.org/u/marcus-j-davies)\
**Post date:** [22 March 2023 15:05 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/18 "2023-03-22T15:05:40Z")

</div>

Ok,

I have failed to witness the keyboard not sending characters (Evan after waiting 1:30 after the last)

BUT  
if the length of your barcodes are 16, would it make more sense to trigger `make_entire_code`  
after the 16th?

 ![Screenshot 2023-03-22 at 15.00.30](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/5/5/5558d7046818dff271a15b159c8ee8835a169f2a.png)  
 ![Screenshot 2023-03-22 at 15.07.36](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/b/3bf58400257d11f52f6814bd277f5b16e1a0fdd5.png)

Also, reading the keyboard is achieved via a python process that opens up a file read operation of the "keyboard" device - could the barcode scanner going into standby be killing this process perhaps, and it needing to start up again, before reading continues (only after the scanner wakes up again) - given the file could become an invalid resource.

> <https://github.com/node-red/node-red-nodes/blob/a14ef95fb3cdfabdba381ef1133c2e05a3baa93c/hardware/PiGpio/nrgpio.py#L189>

Note: I used a keyboard, that might skew my investigation

🤷‍♂️

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [23 March 2023 10:21 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/19 "2023-03-23T10:21:31Z")

</div>

Thanks, marcus-j-davies!

Today I tried another approach, USB port power control.

I got to know a command, uhubctl, which control and monitor USB port power status.  
It makes a slight progress.

I added an independent flow in my Node-RED flow. It injects a trigger at every 30s  
and execute a command below.

> sudo uhubctl -l 1-1 -p 2 -a off

By the way my USB port status is this.

pi@raspberrypi:~ $ sudo uhubctl  
Current status for hub 1-1 [0424:9514, USB 2.00, 5 ports, ppps]  
Port 1: 0503 power highspeed enable connect [0424:ec00]  
Port 2: 0103 power enable connect [28e9:03da NETUM USB Keyboard]  
Port 3: 0100 power  
Port 4: 0100 power  
Port 5: 0100 power  
Current status for hub 1 [1d6b:0002 Linux 5.10.17-v7+ dwc\_otg\_hcd DWC OTG Controller 3f980000.usb, USB 2.00, 1 ports, ppps]  
Port 1: 0503 power highspeed enable connect [0424:9514, USB 2.00, 5 ports, ppps]

As I said above, it makes a slight progress. It means I could read a barcode anytime.  
But it seemed reading process might take long, it is too slow. I have to wait, no immediate  
response. Not good for barcode reading system.

So I'm wondering any other way, command to control USB hub/port.

I would be appreciated, if you have any idea.

---

<div class="post-metadata">

**Author:** ![NoriAbe](https://avatars.discourse-cdn.com/v4/letter/n/48db29/32.png) [@NoriAbe](https://discourse.nodered.org/u/NoriAbe)\
**Post date:** [23 March 2023 13:21 UTC](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712/20 "2023-03-23T13:21:19Z")

</div>

2 more things.

1. It's clear and strange if Ras Pi is not connected to internet wireless, WiFi, or wired,  
It never fails.
2. If I reset, means turn off and on the power, my wifi router, Ras Pi can read the  
barcode correctly for a while, maybe about 5 to 7 minutes. After that it fails. Strange ...

Internal USB hub causes these problems?

[Next page](https://discourse.nodered.org/t/pi-keyboard-node-with-internet-connection-looses-characters/76712.md?page=2)