# PR55-61E If you have any questions about setting the alarm

**URL:** https://discourse.nodered.org/t/pr55-61e-if-you-have-any-questions-about-setting-the-alarm/77973
**Category:** General
**Tags:** node-red-dashboard
**Created:** [27 April 2023 08:29 UTC](https://discourse.nodered.org/t/pr55-61e-if-you-have-any-questions-about-setting-the-alarm/77973 "2023-04-27T08:29:44Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Tomi](https://avatars.discourse-cdn.com/v4/letter/t/f4b2a3/32.png) [@Tomi](https://discourse.nodered.org/u/Tomi)
#### Post date: [27 April 2023 08:29 UTC](https://discourse.nodered.org/t/pr55-61e-if-you-have-any-questions-about-setting-the-alarm/77973/1 "2023-04-27T08:29:44Z")

</div>

I’m using the PR55-61E sensor  
I’m using Node Red  
If the setting value of the motor goes up above the temperature  
I want to give you an alarm warning signal, so I hope you find a way to solve it. Even if you refer to the website, the program setting value did not appear anywhere, so please refer to the picture to solve the problem.

Thank

 ![2023.04.27](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/d/5/d553af64f300c74d0eb76adf257ba98e27d81f3a.png)

---

<div class="post-metadata">

### Author: ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)
#### Post date: [26 June 2023 08:30 UTC](https://discourse.nodered.org/t/pr55-61e-if-you-have-any-questions-about-setting-the-alarm/77973/2 "2023-06-26T08:30:17Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.