# Problems with a athom 3gang switch
**URL:** https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791
**Category:** General
**Tags:** function-node
**Created:** [17 December 2023 20:38 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791 "2023-12-17T20:38:53Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@Bogi1](https://discourse.nodered.org/u/Bogi1)
#### Post date: [17 December 2023 20:38 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/1 "2023-12-17T20:38:53Z")
Good evening,
i need help to bring my Athom switch to work, this is already flashed to Tasmota last version and should switch 3 Gosund SP111 Plugs also on Tasmota.
On the picture you can see what i did already.
Schalter\_1 is the Athom, Drucker\_oben and Drucker\_unten are 2 of the Gosund Plugs, it is possible to switch the Drucker\_oben with the button1 on the switch, but it is not possible to switch Drucker\_unten with the second one.
Both debugs shows fals and true in boolean.
I have not a real chance to configure the second chanel in another way, because the topic will be the same everytime.
May somebody can help me, because i am complete new in nodered.
If any other information is needed i will send it as fast as possible
Thanks for any help
Cord
---
### Author:  [@jbudd](https://discourse.nodered.org/u/jbudd)
#### Post date: [17 December 2023 20:56 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/2 "2023-12-17T20:56:57Z")
> [@Bogi1](#):
>
> Both debugs shows fals and true in boolean.
Please show us the output from your debug nodes switch\_1 and switch\_2 when you press button 1 and button 2.
Since the Gosund plugs are flashed with Tasmota, there should be a web interface for each.
Please show us a screen capture of the page displayed when you enter the Gosunds' IP address.
It should look something like this
---
### Author:  [@stefan24](https://discourse.nodered.org/u/stefan24)
#### Post date: [17 December 2023 21:35 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/3 "2023-12-17T21:35:31Z")
Post your flow with "vorformatierter Text"
```auto
tippe oder füge den Code hier ein
```
---
### Author:  [@Bogi1](https://discourse.nodered.org/u/Bogi1)
#### Post date: [17 December 2023 21:42 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/4 "2023-12-17T21:42:40Z")
Thx for the answer
i hope this is ok
@stefan24
inside this flow are also 2 additional Gosund to test them after flashing.
```auto
[
{
"id": "81c6fa4b197c3ccd",
"type": "tab",
"label": "Flow 1",
"disabled": false,
"info": "",
"env": []
},
{
"id": "6d7c2ef8af74f907",
"type": "Tasmota Switch",
"z": "81c6fa4b197c3ccd",
"broker": "06d1cce264ae7488",
"device": "Drucker_oben",
"name": "",
"outputs": 1,
"uidisabler": false,
"fullTopic": "Steckdose_1%prefix%/%topic%/",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"notopic": false,
"x": 900,
"y": 140,
"wires": [
[]
],
"inputLabels": [
"switch2"
]
},
{
"id": "9c9c529e5311e027",
"type": "Tasmota Switch",
"z": "81c6fa4b197c3ccd",
"broker": "06d1cce264ae7488",
"device": "Schalter_1",
"name": "",
"outputs": 3,
"uidisabler": false,
"fullTopic": "Schalter_Buero%prefix%/%topic%/",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"notopic": false,
"x": 630,
"y": 180,
"wires": [
[
"00743512f7c3944b",
"6d7c2ef8af74f907"
],
[
"671af514d511365e",
"5b8544f37208eaa0",
"69159f2d3c65e96b"
],
[
"d4ee88bec18f2e8d"
]
],
"outputLabels": [
"POWER1",
"POWER2",
"POWER3"
],
"info": "``{\r\n \"device\": \"Schalter_1\",\r\n \"name\": \"WLAN-Schalter\",\r\n \"channels\": [\r\n {\r\n \"id\": 1,\r\n \"name\": \"Steckdose 1\",\r\n \"type\": \"outlet\",\r\n \"tasmota_topic\": \"cmnd/sonoff/POWER1\"\r\n },\r\n {\r\n \"id\": 2,\r\n \"name\": \"Steckdose 2\",\r\n \"type\": \"outlet\",\r\n \"tasmota_topic\": \"cmnd/sonoff/POWER2\"\r\n },\r\n {\r\n \"id\": 3,\r\n \"name\": \"Steckdose 3\",\r\n \"type\": \"outlet\",\r\n \"tasmota_topic\": \"cmnd/sonoff/POWER3\"\r\n }\r\n]\r\n}\r\n"
},
{
"id": "00743512f7c3944b",
"type": "debug",
"z": "81c6fa4b197c3ccd",
"name": "switch_1",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 900,
"y": 20,
"wires": []
},
{
"id": "671af514d511365e",
"type": "debug",
"z": "81c6fa4b197c3ccd",
"name": "switch_2",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 900,
"y": 60,
"wires": []
},
{
"id": "717164fc0f59ecb2",
"type": "inject",
"z": "81c6fa4b197c3ccd",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "true",
"payloadType": "bool",
"x": 810,
"y": 460,
"wires": [
[
"5b8544f37208eaa0"
]
]
},
{
"id": "b6b575fb6b0a0dd0",
"type": "inject",
"z": "81c6fa4b197c3ccd",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "false",
"payloadType": "bool",
"x": 810,
"y": 520,
"wires": [
[
"5b8544f37208eaa0"
]
]
},
{
"id": "5b8544f37208eaa0",
"type": "Tasmota Switch",
"z": "81c6fa4b197c3ccd",
"broker": "06d1cce264ae7488",
"device": "Drucker_unten",
"name": "",
"outputs": 1,
"uidisabler": false,
"fullTopic": "Steckdose_2%prefix%/%topic%/",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"notopic": false,
"x": 900,
"y": 300,
"wires": [
[]
],
"inputLabels": [
"switch2"
]
},
{
"id": "d4ee88bec18f2e8d",
"type": "debug",
"z": "81c6fa4b197c3ccd",
"name": "switch_3",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 900,
"y": 220,
"wires": []
},
{
"id": "9f292d46f1929baf",
"type": "inject",
"z": "81c6fa4b197c3ccd",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "true",
"payloadType": "bool",
"x": 450,
"y": 140,
"wires": [
[
"9c9c529e5311e027"
]
]
},
{
"id": "7ad76d9a62e1e797",
"type": "inject",
"z": "81c6fa4b197c3ccd",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "false",
"payloadType": "bool",
"x": 450,
"y": 200,
"wires": [
[
"9c9c529e5311e027"
]
]
},
{
"id": "52ae2d4854fd5930",
"type": "Tasmota Switch",
"z": "81c6fa4b197c3ccd",
"broker": "06d1cce264ae7488",
"device": "Steckdose3",
"name": "",
"outputs": 1,
"uidisabler": false,
"fullTopic": "Steckdose3%prefix%/%topic%/",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"notopic": false,
"x": 1610,
"y": 60,
"wires": [
[]
]
},
{
"id": "9880685a6cbfe0e8",
"type": "Tasmota Switch",
"z": "81c6fa4b197c3ccd",
"broker": "06d1cce264ae7488",
"device": "Steckdose4",
"name": "",
"outputs": 1,
"uidisabler": false,
"fullTopic": "Steckdose4%prefix%/%topic%/",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"notopic": false,
"x": 1610,
"y": 120,
"wires": [
[]
]
},
{
"id": "69159f2d3c65e96b",
"type": "debug",
"z": "81c6fa4b197c3ccd",
"name": "debug 2",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 1100,
"y": 180,
"wires": []
},
{
"id": "06d1cce264ae7488",
"type": "tasmota-mqtt-broker",
"name": "Steuer",
"broker": "192.168.69.61",
"port": "1883",
"clientid": "",
"usetls": false,
"keepalive": "60",
"cleansession": true
}
]
```
---
### Author:  [@Bogi1](https://discourse.nodered.org/u/Bogi1)
#### Post date: [17 December 2023 21:45 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/5 "2023-12-17T21:45:19Z")
I have to add another post, because i am not allowed to put more than two
---
### Author:  [@jbudd](https://discourse.nodered.org/u/jbudd)
#### Post date: [17 December 2023 23:09 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/6 "2023-12-17T23:09:31Z")
I am a bit confused by your Tasmota full topic `Steckdose_1%prefix%/%topic%/` since I never change my devices' full topic from `%prefix%/%topic%/`.
However, I believe that the status shown on your screen capture proves that the config matches in node and device.
Do your true/false inject directly to Drucker\_unten work?
Check the **topic** output from Schalter\_1; change the debug nodes to display the full message.
---
### Author:  [@Bogi1](https://discourse.nodered.org/u/Bogi1)
#### Post date: [18 December 2023 06:18 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/7 "2023-12-18T06:18:01Z")
Good morning
in the description it seems i have to chnge the full topic to an own name on any node. if its not like this i will leave it.
Yes the inject works fine in Drucker\_unten
This is the full message.
Cord
---
### Author:  [@jbudd](https://discourse.nodered.org/u/jbudd)
#### Post date: [18 December 2023 11:34 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/8 "2023-12-18T11:34:51Z")
The message emitted from Schalter\_1 has
```auto
{
payload: "true",
topic :"switch2"
}
```
while your direct inject to Drucker\_unten has
```auto
{
payload: "true",
topic :""
}
```
Does it make a difference if your injects also set the topic?
---
### Author:  [@Bogi1](https://discourse.nodered.org/u/Bogi1)
#### Post date: [18 December 2023 13:20 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/9 "2023-12-18T13:20:32Z")
If i change to "switch2" it stopps working.
Seems you find something, but how to change it?
---
### Author:  [@jbudd](https://discourse.nodered.org/u/jbudd)
#### Post date: [18 December 2023 13:34 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/10 "2023-12-18T13:34:48Z")
There is a setting in the switch node "Don't set topic in output messages".
Perhaps ticking that in Schalter\_1 will resolve it?
---
### Author:  [@Bogi1](https://discourse.nodered.org/u/Bogi1)
#### Post date: [18 December 2023 13:54 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/11 "2023-12-18T13:54:10Z")
Thank you for this
easiest solution
Cord
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [1 January 2024 13:54 UTC](https://discourse.nodered.org/t/problems-with-a-athom-3gang-switch/83791/12 "2024-01-01T13:54:27Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.