# Pulling readings from i2c chip into Node-Red

**URL:** <https://discourse.nodered.org/t/pulling-readings-from-i2c-chip-into-node-red/19210>\
**Category:** General\
**Created:** [16 December 2019 02:01 UTC](https://discourse.nodered.org/t/pulling-readings-from-i2c-chip-into-node-red/19210 "2019-12-16T02:01:48Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![SonoraTechnical](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/sonoratechnical/32/20033_2.png) [@SonoraTechnical](https://discourse.nodered.org/u/SonoraTechnical)\
**Post date:** [2 May 2020 06:59 UTC](https://discourse.nodered.org/t/pulling-readings-from-i2c-chip-into-node-red/19210/14 "2020-05-02T06:59:03Z")

</div>

Folks,  
I'm going to respond again (I used to participate as ODwyerPW, but now I use my company name of SonoraTechnical... I'm the same guy).

I have learned how to use the Node-RED-contrib-i2c i2c-out node to send multiple character commands to Atlas-Scientific Circuits over i2c. Rather than repeat all of that information here, I'd like to direct you to an Aquarium Controller Thread I've started.... where I tackle the Atlas-Scientific Circuits and i2c node issues early on..

[Atlas-Scientific i2c circuits and the i2c-out node for complex commands](https://discourse.nodered.org/t/aquarium-controller-raspberry-pi-4b-node-red-atlas-scientific-i2c-devices-ncd-i2c-relay-board/25839/3).

I hope this helps allot of you that are using these products.

---

_[View the full topic](https://discourse.nodered.org/t/pulling-readings-from-i2c-chip-into-node-red/19210)._