# Read Byte array of MPU6000 using I2C node in node red in Windows OS

**URL:** <https://discourse.nodered.org/t/read-byte-array-of-mpu6000-using-i2c-node-in-node-red-in-windows-os/7566>\
**Category:** Hardware\
**Created:** [4 February 2019 10:39 UTC](https://discourse.nodered.org/t/read-byte-array-of-mpu6000-using-i2c-node-in-node-red-in-windows-os/7566 "2019-02-04T10:39:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fredy76](https://avatars.discourse-cdn.com/v4/letter/f/ce73a5/32.png) [@fredy76](https://discourse.nodered.org/u/fredy76)\
**Post date:** [4 February 2019 10:39 UTC](https://discourse.nodered.org/t/read-byte-array-of-mpu6000-using-i2c-node-in-node-red-in-windows-os/7566/1 "2019-02-04T10:39:22Z")

</div>

Hi, Is there the best way to read the byte array of [MPU-6000 I2C modules](https://store.ncd.io/product/mpu-6000-aka-mpu-6050-6-axis-motiontracking-3-axis-gyroscope-3-axis-accelerometer-digital-motion-processor-i2c-mini-module/)?

The sensor is connected to Arduino Uno via I2C cable but is there any possible way to use I2C node while running the node red in Windows Operating system?

---

<div class="post-metadata">

**Author:** ![ghayne](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/ghayne/32/39_2.png) [@ghayne](https://discourse.nodered.org/u/ghayne)\
**Post date:** [4 February 2019 10:44 UTC](https://discourse.nodered.org/t/read-byte-array-of-mpu6000-using-i2c-node-in-node-red-in-windows-os/7566/2 "2019-02-04T10:44:10Z")

</div>

Unfortunately, Windows has no native I2C support.

---

<div class="post-metadata">

**Author:** ![ghayne](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/ghayne/32/39_2.png) [@ghayne](https://discourse.nodered.org/u/ghayne)\
**Post date:** [4 February 2019 10:48 UTC](https://discourse.nodered.org/t/read-byte-array-of-mpu6000-using-i2c-node-in-node-red-in-windows-os/7566/3 "2019-02-04T10:48:40Z")

</div>

This might be the answer:

> **[Adafruit FT232H Breakout - General Purpose USB to GPIO+SPI+I2C](https://www.adafruit.com/product/2264)**
>
> Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer?  Sure you can program an Arduino or ...