# Reading data in NODE-RED on Raspberry PI3 + RadioHead (LORA) + Dragino

**URL:** <https://discourse.nodered.org/t/reading-data-in-node-red-on-raspberry-pi3-radiohead-lora-dragino/74780>\
**Category:** General\
**Created:** [6 February 2023 10:30 UTC](https://discourse.nodered.org/t/reading-data-in-node-red-on-raspberry-pi3-radiohead-lora-dragino/74780 "2023-02-06T10:30:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![batigolle](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@batigolle](https://discourse.nodered.org/u/batigolle)\
**Post date:** [6 February 2023 10:30 UTC](https://discourse.nodered.org/t/reading-data-in-node-red-on-raspberry-pi3-radiohead-lora-dragino/74780/1 "2023-02-06T10:30:57Z")

</div>

Good morning everyone  
I successfully installed the RadioHead library on Raspberry PI3+ equipped with a Dragino board with RFM95 module, to create a LORA receiver.

After compiling and creating the RF95\_server executable, I ran it in a rasperry terminal window and successfully verified receiving messages sent from an Arduino LORA sensor, which reads the temperatures in my garden.

![ricezionedati](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/4/b/4b8b5572a106ab15cde1e62d1234c6c100508700.jpeg)

But I stopped here ... here is my request for help

**How can I read the data received from the ./RF95\_server command into Node-Red ?**

Thanks in advance for the suggestions

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [7 April 2023 10:31 UTC](https://discourse.nodered.org/t/reading-data-in-node-red-on-raspberry-pi3-radiohead-lora-dragino/74780/2 "2023-04-07T10:31:43Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.