# Reading multiple addresses from MC Protocol (Mitsubishi FX PLC)

**URL:** <https://discourse.nodered.org/t/reading-multiple-addresses-from-mc-protocol-mitsubishi-fx-plc/92340>\
**Category:** Industrial\
**Created:** [12 October 2024 11:32 UTC](https://discourse.nodered.org/t/reading-multiple-addresses-from-mc-protocol-mitsubishi-fx-plc/92340 "2024-10-12T11:32:11Z")\
**Posts on this page:** 1\
**Showing post:** 68

<div class="post-metadata">

**Author:** ![Steve-Mcl](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/steve-mcl/32/4826_2.png) [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)\
**Post date:** [13 October 2024 09:52 UTC](https://discourse.nodered.org/t/reading-multiple-addresses-from-mc-protocol-mitsubishi-fx-plc/92340/68 "2024-10-13T09:52:27Z")

</div>

> [@Jayeshpitale1](#):
>
> i have address M70 to open a door then i have put M70 in address and what to put in data

You know you can just try stuff right?

try  
`payload: 1`

If you are using a change or inject node to provide the value, make sure you chose the NUM type

![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/1/e14b6f43729eceb1333582608f0e7e86d614536a.png)

![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/4/8/48adf2d7ee94b4f5eb8ffd51ff4e48cd4bceabd2.png)

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/4/e499c4178ba98055c2c189c805be54083a7af64e.png)

---

_[View the full topic](https://discourse.nodered.org/t/reading-multiple-addresses-from-mc-protocol-mitsubishi-fx-plc/92340)._